QD Devices Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ADM1060ARUCS0103R7

ADM1060ARUCS0103R7

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Monitoring and Protection
  • Characteristics: High accuracy, low power consumption
  • Package: 10-WSON (3x3)
  • Essence: Provides voltage monitoring and protection for critical systems
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 0V to 60V
  • Operating Temperature Range: -40°C to 125°C
  • Accuracy: ±1%
  • Quiescent Current: 50µA
  • Overvoltage Threshold: Programmable from 0.6V to 6V
  • Undervoltage Threshold: Programmable from 0.6V to 6V

Detailed Pin Configuration

  • Pin 1: VDD
  • Pin 2: OV
  • Pin 3: UV
  • Pin 4: GND
  • Pin 5: FLT
  • Pin 6: EN
  • Pin 7: WD
  • Pin 8: NC

Functional Features

  • Overvoltage and undervoltage monitoring
  • Programmable threshold levels
  • Fault detection and reporting
  • Watchdog timer for system reset
  • Low quiescent current for power efficiency

Advantages

  • High accuracy voltage monitoring
  • Wide input voltage range
  • Low power consumption
  • Small package size for space-constrained applications

Disadvantages

  • Limited to voltage monitoring and protection functions
  • Not suitable for high-current applications

Working Principles

The ADM1060ARUCS0103R7 operates by continuously monitoring the input voltage and comparing it to the programmed threshold levels. When an overvoltage or undervoltage condition is detected, the device triggers the FLT pin and reports the fault condition. The integrated watchdog timer provides an additional layer of protection by resetting the system in case of a fault.

Detailed Application Field Plans

This product is ideal for use in battery management systems, power distribution units, industrial control systems, and automotive electronics where precise voltage monitoring and protection are critical for system reliability.

Detailed and Complete Alternative Models

  • ADM1060ARUCS0103R7: 0V to 60V input voltage range
  • ADM1061ARUCS0103R7: 0V to 100V input voltage range
  • ADM1062ARUCS0103R7: 0V to 150V input voltage range
  • ADM1063ARUCS0103R7: 0V to 200V input voltage range

Note: The alternative models listed above provide varying input voltage ranges to suit different application requirements.

This comprehensive entry provides detailed information about the ADM1060ARUCS0103R7, including its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ADM1060ARUCS0103R7 في الحلول التقنية

  1. What is the ADM1060ARUCS0103R7?

    • The ADM1060ARUCS0103R7 is a configurable supervisory circuit that provides monitoring and control functions for power management applications.

  2. What are the key features of the ADM1060ARUCS0103R7?

    • The key features include 10 analog input channels, 8 GPIO pins, programmable voltage and current monitoring, and fault detection capabilities.

  3. How can the ADM1060ARUCS0103R7 be used in technical solutions?

    • It can be used to monitor and control power supply voltages, currents, and faults in various technical solutions such as industrial automation, telecommunications, and automotive systems.

  4. What are the programming options for the ADM1060ARUCS0103R7?

    • The device can be programmed using an I2C interface or through pin-strap configuration, allowing for flexible customization based on specific application requirements.

  5. What are the typical operating conditions for the ADM1060ARUCS0103R7?

    • The device operates over a wide temperature range, typically from -40°C to 125°C, and supports a wide input voltage range, making it suitable for diverse operating environments.

  6. How does the fault detection mechanism work in the ADM1060ARUCS0103R7?

    • The device can detect overvoltage, undervoltage, overcurrent, and open-wire faults, providing comprehensive protection for power management systems.

  7. Can the ADM1060ARUCS0103R7 support multi-channel monitoring?

    • Yes, the device supports simultaneous monitoring of multiple analog input channels, enabling efficient supervision of complex power systems.

  8. What are the available diagnostic and status reporting features in the ADM1060ARUCS0103R7?

    • The device provides diagnostic information and status reporting through its integrated ADCs and GPIO pins, facilitating real-time system monitoring and troubleshooting.

  9. Is the ADM1060ARUCS0103R7 suitable for high-reliability applications?

    • Yes, the device is designed for high-reliability applications and offers built-in self-test features to ensure robust performance in critical systems.

  10. How can the ADM1060ARUCS0103R7 contribute to system efficiency and safety?

    • By providing accurate monitoring and control capabilities, the device helps optimize power management, enhance system efficiency, and improve overall operational safety.