Bourns Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TISP4250M3LMFR
عرض التفاصيل جداول البيانات

TISP4250M3LMFR

Product Overview

Category

The TISP4250M3LMFR belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used for protecting sensitive electronics from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

  • Low clamping voltage
  • Fast response time
  • High surge current capability

Package

The TISP4250M3LMFR is available in a surface mount package.

Essence

The essence of the TISP4250M3LMFR lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.

Packaging/Quantity

The TISP4250M3LMFR is typically packaged in reels and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Breakdown Voltage: 25V
  • Peak Pulse Current: 100A
  • Clamping Voltage: 40V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The TISP4250M3LMFR typically has three pins: 1. Anode 2. Cathode 3. Ground

Functional Features

  • Bi-directional protection
  • Low leakage current
  • Robust construction for reliability

Advantages and Disadvantages

Advantages

  • Fast response time protects sensitive components
  • High surge current capability
  • Bi-directional protection enhances versatility

Disadvantages

  • Clamping voltage may be higher than some alternative models
  • Sensitive to improper handling during installation

Working Principles

The TISP4250M3LMFR operates by shunting excessive voltage transients to ground, thereby limiting the voltage across protected components.

Detailed Application Field Plans

The TISP4250M3LMFR is commonly used in the following applications: - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the TISP4250M3LMFR include: - TISP4180M3BJR-S - TISP61089BDR-S - TISP61089ADR-S

In conclusion, the TISP4250M3LMFR is a crucial component in protecting electronic circuits from voltage transients, offering fast response times and high surge current capabilities. Its bi-directional protection and low leakage current make it suitable for a wide range of applications, although care must be taken during installation due to its sensitivity.

[Word count: 345 words]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TISP4250M3LMFR في الحلول التقنية

  1. What is the maximum operating temperature of TISP4250M3LMFR?

    • The maximum operating temperature of TISP4250M3LMFR is 150°C.

  2. What is the breakdown voltage of TISP4250M3LMFR?

    • The breakdown voltage of TISP4250M3LMFR is 6V.

  3. What is the typical capacitance of TISP4250M3LMFR?

    • The typical capacitance of TISP4250M3LMFR is 5pF.

  4. What is the recommended application for TISP4250M3LMFR?

    • TISP4250M3LMFR is commonly used for overvoltage protection in telecommunication and data communication systems.

  5. What is the response time of TISP4250M3LMFR?

    • The response time of TISP4250M3LMFR is typically less than 1ns.

  6. Is TISP4250M3LMFR suitable for high-speed data lines?

    • Yes, TISP4250M3LMFR is suitable for protecting high-speed data lines from transient overvoltage events.

  7. Does TISP4250M3LMFR require external components for operation?

    • TISP4250M3LMFR does not require external components for basic operation.

  8. What is the package type of TISP4250M3LMFR?

    • TISP4250M3LMFR is available in a small outline SMD package.

  9. Can TISP4250M3LMFR be used in outdoor applications?

    • Yes, TISP4250M3LMFR is suitable for outdoor applications due to its robust design.

  10. What are the key advantages of using TISP4250M3LMFR in technical solutions?

    • The key advantages of TISP4250M3LMFR include its fast response time, low capacitance, and ability to provide reliable overvoltage protection in various technical solutions.