5KP30A-G Product Overview
Introduction
The 5KP30A-G is a high-performance diode designed for use in various electronic applications. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic Components
- Use: Surge Protection
- Characteristics: High Power Handling, Fast Response Time
- Package: DO-201AD
- Essence: Transient Voltage Suppressor Diode
- Packaging/Quantity: Tape & Reel, 500 units per reel
Specifications
- Voltage - Reverse Standoff (Typ): 30V
- Voltage - Breakdown (Min): 33.3V
- Power (Peak Pulse): 5000W
- Type: Zener
Detailed Pin Configuration
The 5KP30A-G diode has a standard DO-201AD package with two leads. The anode is connected to the positive terminal, while the cathode is connected to the negative terminal.
Functional Features
- Transient Voltage Suppression: Protects against voltage spikes and transients.
- Fast Response Time: Rapid reaction to overvoltage conditions.
- High Power Handling: Capable of dissipating large amounts of energy.
Advantages and Disadvantages
Advantages
- Effective surge protection
- Fast response time
- High power handling capacity
Disadvantages
- Higher cost compared to standard diodes
- Requires careful handling due to high power capabilities
Working Principles
The 5KP30A-G operates by diverting excess voltage away from sensitive components when a transient event occurs. It rapidly clamps the voltage to a safe level, protecting downstream circuitry from damage.
Detailed Application Field Plans
The 5KP30A-G is commonly used in the following applications: 1. Power Supplies: Protects sensitive electronics from voltage surges. 2. Telecommunications Equipment: Safeguards against lightning-induced surges. 3. Automotive Electronics: Shields vehicle systems from voltage transients.
Detailed and Complete Alternative Models
- 5KP26A-G: Lower voltage rating for less demanding applications.
- 5KP36A-G: Higher voltage rating for more robust surge protection.
In conclusion, the 5KP30A-G diode offers reliable surge protection with fast response times and high power handling capabilities, making it suitable for a wide range of electronic applications.
[Word Count: 345]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 5KP30A-G في الحلول التقنية
Sure, here are 10 common questions and answers related to the application of 5KP30A-G in technical solutions:
Q: What is the maximum peak pulse power of 5KP30A-G? A: The maximum peak pulse power is 5000 watts for a 10/1000μs waveform.
Q: What is the breakdown voltage of 5KP30A-G? A: The breakdown voltage is typically 30 volts.
Q: What is the operating temperature range for 5KP30A-G? A: The operating temperature range is -55°C to +175°C.
Q: What is the typical clamping voltage of 5KP30A-G? A: The typical clamping voltage is 38.6 volts at 100A.
Q: What is the reverse stand-off voltage of 5KP30A-G? A: The reverse stand-off voltage is 30 volts.
Q: What is the package type of 5KP30A-G? A: It is available in a DO-201AD (DO-27) package.
Q: What are the typical applications for 5KP30A-G? A: It is commonly used in surge protection for sensitive electronics, such as in power supplies, telecommunications equipment, and industrial controls.
Q: What is the response time of 5KP30A-G? A: The response time is less than 1.0 nanosecond from 0 volts to minimum breakdown.
Q: Is 5KP30A-G RoHS compliant? A: Yes, it is RoHS compliant.
Q: What are the recommended mounting techniques for 5KP30A-G? A: It is recommended to use thermal transfer compound and a torque of 5 in-lbs for the stud. Additionally, the device should be mounted on a heat sink to maximize thermal conduction.
I hope these answers are helpful! Let me know if you need further assistance.