Category: Integrated Circuit (IC)
Use: Memory device
Characteristics: - Low power consumption - High-speed operation - Non-volatile storage - Small form factor
Package: BGA (Ball Grid Array)
Essence: The CY62146EV30LL-45BVXIT is a memory IC that offers high-speed and low-power operation, making it suitable for various applications requiring non-volatile storage.
Packaging/Quantity: The CY62146EV30LL-45BVXIT is available in a BGA package. The quantity per package may vary depending on the supplier.
The CY62146EV30LL-45BVXIT has a total of 48 pins. The pin configuration is as follows:
```
1 A0-A16 Address Inputs 2 DQ0-DQ7 Data Inputs/Outputs 3 /CE Chip Enable 4 /OE Output Enable 5 /WE Write Enable 6 VCC Power Supply 7 GND Ground 8 NC No Connection ... ```
(Note: The complete pin configuration table contains all 48 pins.)
Advantages: - Low power consumption - High-speed operation - Non-volatile storage - Compact size
Disadvantages: - Limited capacity (1 Megabit)
The CY62146EV30LL-45BVXIT utilizes flash memory technology to store and retrieve data. It operates by applying appropriate voltage levels to the address inputs, enabling the chip, and controlling the read/write operations through the control signals (/CE, /OE, /WE). The stored data can be accessed and modified as required.
The CY62146EV30LL-45BVXIT is widely used in various electronic devices and systems that require non-volatile memory storage. Some of the application fields include:
Consumer Electronics:
Automotive:
Industrial Automation:
Medical Devices:
(Note: The list of alternative models can be expanded based on the availability and compatibility requirements.)
This concludes the encyclopedia entry for the CY62146EV30LL-45BVXIT memory IC.
Sure! Here are 10 common questions and answers related to the application of CY62146EV30LL-45BVXIT in technical solutions:
Question: What is the operating voltage range of CY62146EV30LL-45BVXIT?
Answer: The operating voltage range of CY62146EV30LL-45BVXIT is 2.7V to 3.6V.
Question: What is the maximum clock frequency supported by CY62146EV30LL-45BVXIT?
Answer: CY62146EV30LL-45BVXIT supports a maximum clock frequency of 45 MHz.
Question: Can CY62146EV30LL-45BVXIT be used in battery-powered devices?
Answer: Yes, CY62146EV30LL-45BVXIT can be used in battery-powered devices as it operates within a low voltage range.
Question: What is the capacity of CY62146EV30LL-45BVXIT?
Answer: CY62146EV30LL-45BVXIT has a capacity of 4 Megabits (512K x 8).
Question: Is CY62146EV30LL-45BVXIT compatible with other memory interfaces?
Answer: Yes, CY62146EV30LL-45BVXIT is compatible with standard asynchronous SRAM interfaces.
Question: Can CY62146EV30LL-45BVXIT be used in industrial applications?
Answer: Yes, CY62146EV30LL-45BVXIT is suitable for industrial applications due to its wide operating temperature range (-40°C to +85°C).
Question: Does CY62146EV30LL-45BVXIT support multiple read and write operations simultaneously?
Answer: Yes, CY62146EV30LL-45BVXIT supports simultaneous read and write operations.
Question: What is the typical access time of CY62146EV30LL-45BVXIT?
Answer: The typical access time of CY62146EV30LL-45BVXIT is 45 ns.
Question: Can CY62146EV30LL-45BVXIT be used in automotive applications?
Answer: Yes, CY62146EV30LL-45BVXIT is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.
Question: Does CY62146EV30LL-45BVXIT have any power-saving features?
Answer: Yes, CY62146EV30LL-45BVXIT has a deep power-down mode that helps conserve power when the device is not in use.
Please note that these answers are based on general information about CY62146EV30LL-45BVXIT and may vary depending on specific application requirements.