Diodes Incorporated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BZX84C20-7
عرض التفاصيل جداول البيانات

BZX84C20-7: Product Overview and Analysis

Introduction

The BZX84C20-7 is a crucial component in the field of electronics, belonging to the category of voltage regulator diodes. This entry will provide an in-depth analysis of the BZX84C20-7, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diode
  • Use: The BZX84C20-7 is primarily used for voltage regulation and protection in electronic circuits.
  • Characteristics: It exhibits stable voltage regulation, low leakage current, and high reliability.
  • Package: SOT-23
  • Essence: The essence of the BZX84C20-7 lies in its ability to maintain a constant voltage output despite fluctuations in input voltage.
  • Packaging/Quantity: Typically available in reels with varying quantities.

Specifications

The BZX84C20-7 has the following specifications: - Voltage Rating: 20V - Power Dissipation: 350mW - Forward Current: 225mA - Reverse Leakage Current: 5µA - Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BZX84C20-7 features a standard SOT-23 package with three pins: Anode, Cathode, and No Connection (NC).

Functional Features

  • Stable Voltage Regulation: Ensures a consistent output voltage under varying input conditions.
  • Overvoltage Protection: Safeguards connected components from potential damage due to voltage spikes.
  • Low Leakage Current: Minimizes power loss and enhances efficiency.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact SOT-23 package
  • Low leakage current

Disadvantages

  • Limited maximum voltage rating
  • Sensitive to excessive current and temperature variations

Working Principles

The BZX84C20-7 operates based on the principle of Zener diode voltage regulation. When the input voltage exceeds the specified level, the diode conducts, effectively regulating the output voltage.

Detailed Application Field Plans

The BZX84C20-7 finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in consumer electronics - Signal conditioning in sensor circuits

Detailed and Complete Alternative Models

Some alternative models to the BZX84C20-7 include: - BZX84C10-7: Lower voltage rating - BZX84C30-7: Higher voltage rating - BZX84C5V1-7: Different voltage rating for specific applications

In conclusion, the BZX84C20-7 plays a pivotal role in voltage regulation and protection within electronic circuits. Its stable characteristics and compact package make it a valuable component across various applications.

[Word Count: 410]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BZX84C20-7 في الحلول التقنية

  1. What is the BZX84C20-7?

    • The BZX84C20-7 is a 20V Zener diode with a nominal power dissipation of 350mW and a maximum continuous current of 225mA.

  2. What are the typical applications of BZX84C20-7?

    • The BZX84C20-7 is commonly used in voltage regulation, overvoltage protection, and signal clamping applications.

  3. What is the maximum reverse leakage current of BZX84C20-7?

    • The maximum reverse leakage current of BZX84C20-7 is typically 5µA at its working voltage.

  4. How does BZX84C20-7 provide overvoltage protection?

    • When the voltage across the BZX84C20-7 exceeds its breakdown voltage (20V), it starts conducting and limits the voltage to protect downstream components.

  5. What is the temperature coefficient of BZX84C20-7?

    • The temperature coefficient of BZX84C20-7 is typically 0.07%/°C, which means its breakdown voltage changes by 0.07% for every degree Celsius change in temperature.

  6. Can BZX84C20-7 be used in series to achieve higher breakdown voltages?

    • Yes, BZX84C20-7 can be connected in series to achieve higher breakdown voltages while maintaining the same current-handling capability.

  7. What is the typical dynamic resistance of BZX84C20-7?

    • The typical dynamic resistance of BZX84C20-7 is around 5Ω, which indicates its ability to limit changes in voltage under varying current conditions.

  8. Is BZX84C20-7 suitable for low-power applications?

    • Yes, BZX84C20-7 is suitable for low-power applications due to its nominal power dissipation of 350mW.

  9. What are the package options available for BZX84C20-7?

    • BZX84C20-7 is available in various surface mount and through-hole packages, such as SOT-23, SOD-123, and SOD-323.

  10. What are the key considerations when designing with BZX84C20-7?

    • Key considerations include ensuring proper heat dissipation, selecting appropriate current-limiting resistors, and understanding the voltage tolerance and stability requirements of the application.