Eaton
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BK/MDL-3/10-R
عرض التفاصيل جداول البيانات

BK/MDL-3/10-R

Product Overview

Category: Electronic Component
Use: Power Distribution and Protection
Characteristics: Compact, High Current Capacity, Reliable
Package: Surface Mount Device (SMD)
Essence: Fuse Holder
Packaging/Quantity: Reel of 3000 units

Specifications

  • Current Rating: 3A
  • Voltage Rating: 250VAC
  • Operating Temperature: -40°C to 85°C
  • Insulation Resistance: 100MΩ min at 500VDC
  • Dielectric Strength: 1500VAC for 1 minute

Detailed Pin Configuration

The BK/MDL-3/10-R features a standard SMD pin configuration with two terminals for easy integration onto circuit boards.

Functional Features

  • Compact design for space-constrained applications
  • High current capacity for reliable power distribution
  • Designed for quick and easy fuse replacement

Advantages and Disadvantages

Advantages: - Reliable overcurrent protection - Compact size for space-saving designs - Easy replacement of fuses

Disadvantages: - Limited to low to moderate current ratings - SMD package may require specialized assembly techniques

Working Principles

The BK/MDL-3/10-R operates based on the principle of interrupting the circuit in case of overcurrent, protecting downstream components from damage. When the current exceeds the rated value, the fuse element melts, breaking the circuit and preventing further damage.

Detailed Application Field Plans

The BK/MDL-3/10-R is suitable for various electronic devices and systems requiring overcurrent protection, such as: - Consumer electronics - Industrial control systems - Automotive electronics - Power supplies

Detailed and Complete Alternative Models

  1. Littelfuse 0251010.MXEP
  2. Eaton Bussmann Series BK/SMD-3-R
  3. Schurter 3405.0014

Note: The alternative models listed above offer similar specifications and functionality to the BK/MDL-3/10-R.

This comprehensive entry provides an in-depth understanding of the BK/MDL-3/10-R, covering its basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BK/MDL-3/10-R في الحلول التقنية

  1. What is BK/MDL-3/10-R?

    • BK/MDL-3/10-R is a type of fuse commonly used in technical solutions to protect electrical circuits from overcurrent.

  2. What are the key specifications of BK/MDL-3/10-R?

    • The BK/MDL-3/10-R fuse has a current rating of 3/10 amps and operates at a voltage of 250V.

  3. How does BK/MDL-3/10-R protect electrical circuits?

    • BK/MDL-3/10-R fuses are designed to interrupt the flow of current when it exceeds the rated value, thereby protecting the circuit from damage due to overcurrent.

  4. Where is BK/MDL-3/10-R commonly used?

    • BK/MDL-3/10-R fuses are commonly used in automotive, industrial, and electronic applications to protect sensitive components and circuits.

  5. What are the alternatives to BK/MDL-3/10-R?

    • Alternatives to BK/MDL-3/10-R include other types of fuses such as fast-acting, slow-blow, or resettable fuses, depending on the specific application requirements.

  6. How do I select the right BK/MDL-3/10-R fuse for my application?

    • The selection of the BK/MDL-3/10-R fuse depends on factors such as the maximum current draw of the circuit, ambient temperature, and the type of load being protected.

  7. Can BK/MDL-3/10-R be used in high-temperature environments?

    • BK/MDL-3/10-R fuses have temperature ratings that should be considered when using them in high-temperature environments to ensure proper performance and safety.

  8. What are the typical failure modes of BK/MDL-3/10-R fuses?

    • BK/MDL-3/10-R fuses can fail due to prolonged overcurrent conditions, mechanical stress, or environmental factors, leading to an open circuit condition.

  9. Are there any special installation considerations for BK/MDL-3/10-R fuses?

    • When installing BK/MDL-3/10-R fuses, it's important to follow proper safety procedures and ensure that the fuse is compatible with the circuit and load requirements.

  10. How can I troubleshoot issues related to BK/MDL-3/10-R fuses?

    • Troubleshooting BK/MDL-3/10-R fuse-related issues involves checking for continuity, inspecting for physical damage, and verifying proper installation and compatibility with the circuit.