EPCOS (TDK)
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
B72580E0140K062
عرض التفاصيل جداول البيانات

B72580E0140K062

Product Overview

Category

The B72580E0140K062 belongs to the category of varistors, which are electronic components used to protect circuits from overvoltage conditions.

Use

This varistor is commonly used in electronic circuits to suppress voltage spikes and transient surges, thereby safeguarding sensitive components from damage.

Characteristics

  • Voltage Protection: Offers protection against voltage surges and transients.
  • Fast Response Time: Rapidly responds to overvoltage conditions to protect the circuit.
  • Reliability: Provides consistent performance and reliability in various applications.

Package

The B72580E0140K062 varistor is typically available in a compact disc-shaped package, suitable for surface mount applications.

Essence

The essence of this varistor lies in its ability to effectively protect electronic circuits from voltage surges and transients, ensuring the longevity and reliability of the connected devices.

Packaging/Quantity

The varistor is usually supplied in reels or trays, with quantities varying based on the manufacturer's specifications.

Specifications

  • Part Number: B72580E0140K062
  • Maximum Allowable Voltage: 14V
  • Nominal Discharge Current: 20A
  • Operating Temperature Range: -40°C to 85°C
  • Dimensions: 7mm diameter, 5.5mm height

Detailed Pin Configuration

The B72580E0140K062 varistor typically has two terminals for connection, with the specific pin configuration being: - Terminal 1: Connected to the input side of the circuit - Terminal 2: Connected to the ground or output side of the circuit

Functional Features

  • Voltage Clamping: When an overvoltage condition occurs, the varistor conducts current to limit the voltage across the circuit.
  • Transient Suppression: Effectively suppresses transient surges to protect connected components.
  • Low Leakage Current: Maintains low leakage current during normal operation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage surges
  • Fast response time
  • Compact and versatile package
  • Low leakage current

Disadvantages

  • Limited maximum allowable voltage
  • Sensitive to prolonged overvoltage conditions

Working Principles

The varistor operates based on the principle of non-linear resistance, where its resistance decreases as the voltage across it increases. This allows the varistor to divert excess current away from the protected circuit, thereby preventing damage due to overvoltage conditions.

Detailed Application Field Plans

The B72580E0140K062 varistor finds extensive use in various electronic applications, including: - Power supplies - Telecommunications equipment - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the B72580E0140K062 varistor include: - B72580T0140K062 - B72580E0150K062 - B72580D0140K062

In conclusion, the B72580E0140K062 varistor offers reliable overvoltage protection for a wide range of electronic applications, making it an essential component in ensuring the longevity and robustness of electronic circuits.

[Word Count: 497]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق B72580E0140K062 في الحلول التقنية

  1. What is the B72580E0140K062 component used for in technical solutions?

    • The B72580E0140K062 is a common mode choke used to suppress electromagnetic interference in electronic circuits.

  2. What are the key specifications of the B72580E0140K062?

    • The B72580E0140K062 has an inductance of 14µH, a rated current of 2A, and a resistance of 60mΩ.

  3. How is the B72580E0140K062 typically connected in a circuit?

    • The B72580E0140K062 is usually connected in series with the signal or power lines to filter out common mode noise.

  4. What are the typical applications of the B72580E0140K062 in technical solutions?

    • The B72580E0140K062 is commonly used in power supplies, communication equipment, and industrial automation systems to reduce electromagnetic interference.

  5. What are the temperature and voltage ratings of the B72580E0140K062?

    • The B72580E0140K062 is rated for operation in temperatures ranging from -40°C to +125°C and can handle voltages up to 50V.

  6. Are there any recommended layout considerations when using the B72580E0140K062?

    • It is advisable to keep the traces connecting the B72580E0140K062 as short as possible and to place it as close to the source of interference as feasible.

  7. Can the B72580E0140K062 be used in automotive applications?

    • Yes, the B72580E0140K062 is suitable for automotive electronics where suppression of electromagnetic interference is required.

  8. Does the B72580E0140K062 require any additional components for proper operation?

    • In most cases, the B72580E0140K062 can be used standalone, but it may benefit from additional filtering components depending on the specific application requirements.

  9. What are the potential benefits of using the B72580E0140K062 in a design?

    • By incorporating the B72580E0140K062, designers can improve the immunity of their circuits to electromagnetic interference, leading to better overall performance and reliability.

  10. Where can I find detailed application notes and guidelines for integrating the B72580E0140K062 into my technical solution?

    • Detailed application notes and guidelines for the B72580E0140K062 can be found on the manufacturer's website or in the product datasheet.