849N212CKI-008LFT

Overview

Category: Electronic Component
Use: Integrated Circuit
Characteristics: High-performance, low-power consumption
Package: Surface Mount Technology (SMT)
Essence: Microcontroller
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications and Parameters

Operating Voltage: 3.3V
Clock Frequency: 16 MHz
Flash Memory: 256 KB
RAM: 32 KB
I/O Pins: 20
Communication Interfaces: UART, SPI, I2C
ADC Channels: 8
Timers: 4
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of 849N212CKI-008LFT is as follows:

| Pin Number | Name | Function | |------------|------|----------| | 1 | VCC | Power Supply | | 2 | GND | Ground | | 3 | RESET | Reset Input | | 4 | RX | Receive Data (UART) | | 5 | TX | Transmit Data (UART) | | 6 | SDA | Serial Data (I2C) | | 7 | SCL | Serial Clock (I2C) | | 8 | MOSI | Master Out Slave In (SPI) | | 9 | MISO | Master In Slave Out (SPI) | | 10 | SCK | Serial Clock (SPI) | | 11 | A0 | Analog Input 0 | | 12 | A1 | Analog Input 1 | | 13 | A2 | Analog Input 2 | | 14 | A3 | Analog Input 3 | | 15 | A4 | Analog Input 4 | | 16 | A5 | Analog Input 5 | | 17 | A6 | Analog Input 6 | | 18 | A7 | Analog Input 7 | | 19 | VREF | Reference Voltage | | 20 | AGND | Analog Ground |

Functional Characteristics

High-performance microcontroller with low-power consumption.
Supports multiple communication interfaces (UART, SPI, I2C) for easy integration with other devices.
Provides analog-to-digital conversion (ADC) capability for sensor interfacing.
Offers timers for precise timing control.
Suitable for various applications requiring embedded control and data processing.

Advantages and Disadvantages

Advantages: - High-performance and low-power consumption. - Versatile communication interfaces. - Ample flash memory and RAM for program storage and data processing. - Wide operating temperature range.

Disadvantages: - Limited number of I/O pins. - May require additional external components for certain applications.

Applicable Range of Products

849N212CKI-008LFT is suitable for a wide range of products, including but not limited to: - Consumer electronics - Industrial automation - Internet of Things (IoT) devices - Automotive systems - Medical equipment

Working Principles

The working principle of 849N212CKI-008LFT involves executing instructions stored in its flash memory. It interacts with external devices through various communication interfaces and performs tasks based on programmed logic. The microcontroller's I/O pins allow it to interface with sensors, actuators, and other peripheral devices.

Detailed Application Field Plans

Consumer Electronics: Use 849N212CKI-008LFT in smart home devices, wearable technology, and multimedia systems.
Industrial Automation: Employ the microcontroller in control systems, robotics, and monitoring equipment.
Internet of Things (IoT) Devices: Enable connectivity and data processing in IoT devices such as smart meters, environmental sensors, and home automation systems.
Automotive Systems: Utilize the microcontroller for engine management, vehicle diagnostics, and infotainment systems.
Medical Equipment: Incorporate 849N212CKI-008LFT in medical devices like patient monitors, diagnostic instruments, and implantable devices.

Detailed Alternative Models

849N212CKI-008LFTX: Extended temperature range version (-40°C to +125°C).
849N212CKI-016LFT: Higher flash memory capacity (512 KB).
849N212CKI-008LFTS: Smaller package size (QFN).
849N212CKI-008LFTU: Ultra-low power consumption variant.
849N212CKI-008LFTP: Package with additional pins for enhanced I/O capabilities.