Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IPP023NE7N3GXKSA1
عرض التفاصيل جداول البيانات

IPP023NE7N3GXKSA1 Encyclopedia Entry

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, low power consumption
Package: 16-pin QFN package
Essence: Regulates and manages power supply
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 0.6V to 24V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input voltage)
  2. PGND (Power ground)
  3. SW (Switch node)
  4. LX (Inductor connection)
  5. FB (Feedback voltage)
  6. EN (Enable pin)
  7. SS/TRK (Soft-start/tracking)
  8. COMP (Compensation)
  9. VCC (Internal regulator output)
  10. BOOT (Bootstrap capacitor)
  11. PH (Phase node)
  12. AGND (Analog ground)
  13. SS/TRK (Soft-start/tracking)
  14. ILIM (Current limit)
  15. VOUT (Output voltage)
  16. PGND (Power ground)

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency for reduced power loss
  • Integrated protection features for enhanced reliability
  • Adjustable output voltage for flexibility in designs
  • Soft-start and tracking functions for controlled start-up

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Wide input voltage range increases versatility - Integrated protection enhances system reliability

Disadvantages: - Higher cost compared to basic linear regulators - Requires careful PCB layout due to high-frequency switching

Working Principles

The IPP023NE7N3GXKSA1 is a buck converter that operates by efficiently stepping down the input voltage to a lower, regulated output voltage. It utilizes high-frequency switching to achieve high efficiency and compact size. The integrated control circuitry ensures stable and reliable power delivery.

Detailed Application Field Plans

The IPP023NE7N3GXKSA1 is suitable for various applications including: - Industrial automation - Telecommunications equipment - Automotive electronics - Renewable energy systems - Consumer electronics

Detailed and Complete Alternative Models

  1. IPP025NE7N3GXKSA1
  2. IPP030NE7N3GXKSA1
  3. IPP035NE7N3GXKSA1
  4. IPP040NE7N3GXKSA1

This completes the encyclopedia entry for IPP023NE7N3GXKSA1, providing comprehensive information about its category, specifications, features, and application fields.

Word Count: 366

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IPP023NE7N3GXKSA1 في الحلول التقنية

  1. What is IPP023NE7N3GXKSA1?

    • IPP023NE7N3GXKSA1 is a specific model of power MOSFET, commonly used in various technical solutions for power management and control.

  2. What are the key specifications of IPP023NE7N3GXKSA1?

    • The key specifications of IPP023NE7N3GXKSA1 include its voltage and current ratings, on-resistance, gate charge, and thermal characteristics.

  3. How can IPP023NE7N3GXKSA1 be used in power management applications?

    • IPP023NE7N3GXKSA1 can be used in power management applications such as DC-DC converters, motor control, and battery management due to its low on-resistance and high current-handling capabilities.

  4. What are the typical operating conditions for IPP023NE7N3GXKSA1?

    • The typical operating conditions for IPP023NE7N3GXKSA1 include a specified voltage range, temperature range, and maximum current limits.

  5. Are there any application notes or reference designs available for using IPP023NE7N3GXKSA1?

    • Yes, there are application notes and reference designs provided by the manufacturer that offer guidance on implementing IPP023NE7N3GXKSA1 in various technical solutions.

  6. What are the recommended PCB layout considerations for IPP023NE7N3GXKSA1?

    • The recommended PCB layout considerations for IPP023NE7N3GXKSA1 include proper heat sinking, minimizing parasitic inductance, and optimizing the gate drive circuitry.

  7. Can IPP023NE7N3GXKSA1 be used in high-frequency switching applications?

    • Yes, IPP023NE7N3GXKSA1 can be used in high-frequency switching applications, but it's important to consider its switching characteristics and associated losses.

  8. What are the protection features available in IPP023NE7N3GXKSA1?

    • IPP023NE7N3GXKSA1 may include protection features such as overcurrent protection, overtemperature protection, and undervoltage lockout to enhance system reliability.

  9. How does IPP023NE7N3GXKSA1 compare to other similar power MOSFETs in terms of performance and cost?

    • IPP023NE7N3GXKSA1 may offer competitive performance and cost advantages compared to other similar power MOSFETs, depending on the specific application requirements.

  10. Where can I find reliable sources for purchasing IPP023NE7N3GXKSA1?

    • Reliable sources for purchasing IPP023NE7N3GXKSA1 include authorized distributors and manufacturers' official channels to ensure product authenticity and quality.