Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IRFR3910CPBF
عرض التفاصيل جداول البيانات

IRFR3910CPBF

Product Overview

Category: Power MOSFET
Use: Switching applications
Characteristics: High power handling, low on-resistance
Package: TO-252
Essence: Power transistor for high-frequency applications
Packaging/Quantity: Tape & Reel, 2500 units

Specifications

  • Voltage Rating: 100V
  • Continuous Drain Current: 33A
  • RDS(ON): 23mΩ
  • Gate Threshold Voltage: 2V
  • Power Dissipation: 94W

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low gate charge
  • Fast switching speed
  • Avalanche energy specified
  • Improved dv/dt capability

Advantages and Disadvantages

Advantages: - High power handling capability - Low on-resistance - Suitable for high-frequency applications

Disadvantages: - Higher gate capacitance compared to some alternatives - Sensitive to static electricity

Working Principles

The IRFR3910CPBF is a power MOSFET that operates based on the principle of field-effect. When a voltage is applied to the gate terminal, it creates an electric field which controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

This MOSFET is commonly used in power supplies, motor control, and DC-DC converters due to its high power handling and fast switching characteristics. It is also utilized in electronic ballasts and audio amplifiers.

Detailed and Complete Alternative Models

  1. IRF4905PBF
  2. IRFZ44N
  3. IRF3205PBF
  4. IRF9540N
  5. IRF540NPBF

Note: The above list is not exhaustive and there are several other alternative models available in the market.

This completes the entry for IRFR3910CPBF according to the English editing encyclopedia format.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IRFR3910CPBF في الحلول التقنية

Sure, here are 10 common questions and answers related to the application of IRFR3910CPBF:

  1. What is the maximum drain-source voltage (Vds) of IRFR3910CPBF?

    • The maximum drain-source voltage (Vds) of IRFR3910CPBF is 100V.

  2. What is the continuous drain current (Id) of IRFR3910CPBF?

    • The continuous drain current (Id) of IRFR3910CPBF is 42A.

  3. What is the on-state resistance (Rds(on)) of IRFR3910CPBF?

    • The on-state resistance (Rds(on)) of IRFR3910CPBF is typically 8.5mΩ at Vgs = 10V.

  4. What is the gate-source voltage (Vgs) for IRFR3910CPBF?

    • The gate-source voltage (Vgs) for IRFR3910CPBF is ±20V.

  5. What is the power dissipation (Pd) of IRFR3910CPBF?

    • The power dissipation (Pd) of IRFR3910CPBF is 130W.

  6. What are the typical applications for IRFR3910CPBF?

    • IRFR3910CPBF is commonly used in power management, motor control, and other high-current switching applications.

  7. What is the operating temperature range for IRFR3910CPBF?

    • The operating temperature range for IRFR3910CPBF is -55°C to 175°C.

  8. Is IRFR3910CPBF suitable for automotive applications?

    • Yes, IRFR3910CPBF is suitable for automotive applications due to its high current handling capability and rugged construction.

  9. Does IRFR3910CPBF require a heat sink for high-power applications?

    • Yes, for high-power applications, it is recommended to use a heat sink to ensure proper thermal management.

  10. Can IRFR3910CPBF be used in parallel to increase current handling capacity?

    • Yes, IRFR3910CPBF can be used in parallel to increase current handling capacity, but proper attention should be given to balancing the current sharing between the devices.

I hope these questions and answers are helpful for your technical solutions involving IRFR3910CPBF. Let me know if you need further assistance!