Infineon Technologies
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IRLR8503TRLPBF
عرض التفاصيل جداول البيانات

IRLR8503TRLPBF

Product Overview

Category

The IRLR8503TRLPBF belongs to the category of power MOSFETs.

Use

It is commonly used as a switching device in various electronic circuits, such as power supplies, motor control, and lighting applications.

Characteristics

  • Low on-resistance
  • High current capability
  • Fast switching speed
  • Low gate drive power
  • Enhanced thermal performance

Package

The IRLR8503TRLPBF is typically available in a DPAK (TO-252) package.

Essence

This MOSFET is essential for efficient power management and control in electronic systems.

Packaging/Quantity

It is usually supplied in reels with a quantity of 2500 units per reel.

Specifications

  • Drain-Source Voltage (VDS): 30V
  • Continuous Drain Current (ID): 85A
  • RDS(ON) (Max) @ VGS = 10V: 4.5mΩ
  • Gate-Source Voltage (VGS): ±20V
  • Total Power Dissipation (PD): 2.5W

Detailed Pin Configuration

The IRLR8503TRLPBF has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low conduction losses
  • Reduced heat generation
  • Improved system efficiency
  • Enhanced reliability

Advantages and Disadvantages

Advantages

  • High current-carrying capability
  • Low on-resistance
  • Fast switching speed
  • Reduced power dissipation

Disadvantages

  • Sensitivity to static electricity
  • Potential for thermal runaway if not properly managed

Working Principles

The IRLR8503TRLPBF operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IRLR8503TRLPBF is widely used in the following applications: - Switched-mode power supplies - Motor control circuits - LED lighting systems - Battery protection circuits - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the IRLR8503TRLPBF include: - IRF3709ZPBF - FDP8878 - AUIRF3710S

In conclusion, the IRLR8503TRLPBF power MOSFET offers high-performance characteristics suitable for a wide range of power management applications, making it an essential component in modern electronic systems.

[Word Count: 345]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IRLR8503TRLPBF في الحلول التقنية

  1. What is IRLR8503TRLPBF?

    • IRLR8503TRLPBF is a power MOSFET transistor designed for use in various technical solutions, particularly in power management and switching applications.

  2. What are the key features of IRLR8503TRLPBF?

    • The key features of IRLR8503TRLPBF include low on-resistance, high current capability, and a small form factor, making it suitable for compact designs.

  3. What voltage and current can IRLR8503TRLPBF handle?

    • IRLR8503TRLPBF can handle voltage levels up to [specify voltage] and currents up to [specify current], making it suitable for a wide range of applications.

  4. In what types of technical solutions can IRLR8503TRLPBF be used?

    • IRLR8503TRLPBF can be used in applications such as motor control, power supplies, LED lighting, and other power management solutions.

  5. What is the thermal performance of IRLR8503TRLPBF?

    • IRLR8503TRLPBF has good thermal performance, with low thermal resistance and the ability to dissipate heat effectively, ensuring reliable operation.

  6. Does IRLR8503TRLPBF require any special driving circuitry?

    • IRLR8503TRLPBF can be driven by standard logic level signals, making it easy to integrate into existing circuit designs without the need for complex driving circuitry.

  7. Is IRLR8503TRLPBF suitable for high-frequency switching applications?

    • Yes, IRLR8503TRLPBF is designed to perform well in high-frequency switching applications, making it versatile for various technical solutions.

  8. What are the typical applications where IRLR8503TRLPBF is commonly used?

    • Common applications for IRLR8503TRLPBF include DC-DC converters, motor drives, battery management systems, and other power switching solutions.

  9. What are the recommended operating conditions for IRLR8503TRLPBF?

    • The recommended operating conditions typically include a specified voltage range, temperature limits, and current ratings, which should be adhered to for optimal performance.

  10. Are there any important considerations when designing with IRLR8503TRLPBF?

    • When designing with IRLR8503TRLPBF, it's important to consider factors such as thermal management, gate drive requirements, and protection circuitry to ensure reliable and efficient operation.