X40421S14-BT1

Product Overview

• Category: Electronic Component
• Use: Integrated Circuit (IC)
• Characteristics: Bluetooth-enabled, compact size, high performance
• Package: Surface Mount Technology (SMT)
• Essence: Wireless communication and data transfer
• Packaging/Quantity: Tape and Reel, 1000 units per reel

Specifications

• Model Number: X40421S14-BT1
• Operating Voltage: 3.3V
• Frequency Range: 2.4GHz - 2.4835GHz
• Data Rate: Up to 3Mbps
• Operating Temperature: -40°C to +85°C
• Interface: SPI (Serial Peripheral Interface)

Detailed Pin Configuration

The X40421S14-BT1 has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | SCK | Serial Clock | | 4 | MISO | Master In Slave Out | | 5 | MOSI | Master Out Slave In | | 6 | CS | Chip Select | | 7 | IRQ | Interrupt Request | | 8 | RESET | Reset |

Functional Features

• Bluetooth connectivity for wireless communication
• High data transfer rate of up to 3Mbps
• Compact size for easy integration into various devices
• Low power consumption for extended battery life
• Reliable and secure data transmission
• Supports SPI interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages

• Enables wireless communication in a compact form factor
• High data transfer rate for quick and efficient data exchange
• Low power consumption prolongs battery life
• Secure and reliable data transmission ensures data integrity
• Easy integration with microcontrollers using SPI interface

Disadvantages

• Limited range compared to other wireless communication technologies
• Susceptible to interference from other devices operating in the same frequency range
• Requires additional components for full functionality (microcontroller, power supply)

Working Principles

The X40421S14-BT1 operates based on Bluetooth technology, which utilizes radio waves to establish a wireless connection between devices. It follows the principles of frequency hopping spread spectrum, where it rapidly switches between different frequencies within the 2.4GHz - 2.4835GHz range to minimize interference.

When powered on, the IC initializes and enters a discoverable mode, allowing other Bluetooth-enabled devices to detect and establish a connection. Once connected, it can transmit and receive data packets using the SPI interface. The integrated antenna ensures reliable signal transmission over short distances.

Detailed Application Field Plans

The X40421S14-BT1 finds applications in various fields, including:

1. Internet of Things (IoT) devices: Enables wireless connectivity in smart home devices, wearables, and industrial sensors.
2. Consumer Electronics: Used in wireless audio devices, gaming peripherals, and remote controls.
3. Automotive: Integrated into car infotainment systems, hands-free calling, and vehicle diagnostics.
4. Healthcare: Enables wireless data transfer in medical devices, such as fitness trackers and remote patient monitoring systems.
5. Industrial Automation: Facilitates wireless communication between machines and control systems.

Detailed and Complete Alternative Models

1. X40421S14-BT2: Similar to X40421S14-BT1 but with extended operating temperature range (-40°C to +105°C).
2. X40421S14-BT3: Enhanced version with higher data transfer rate (up to 6Mbps) and extended range.
3. X40421S14-BT4: Low-power variant optimized for battery-powered devices, with reduced power consumption.

These alternative models offer similar functionality but cater to specific requirements or operating conditions.

Word count: 529 words