The LT1790ACS6-3.3#TRMPBF belongs to the category of voltage references.
This product is commonly used in electronic circuits where a stable and accurate voltage reference is required.
The LT1790ACS6-3.3#TRMPBF has the following specifications:
The LT1790ACS6-3.3#TRMPBF has a SOT-23 package with the following pin configuration:
```
| | --| VOUT | --| GND | --| VIN | |_______| ```
The LT1790ACS6-3.3#TRMPBF is based on a bandgap reference circuit that generates a stable voltage reference regardless of variations in temperature and supply voltage. It utilizes a combination of bipolar and CMOS technologies to achieve high accuracy and low power consumption.
The LT1790ACS6-3.3#TRMPBF finds applications in various fields, including:
Some alternative models to the LT1790ACS6-3.3#TRMPBF include:
These models offer similar voltage reference capabilities and can be considered as alternatives based on specific requirements.
Word count: 315 words
Sure! Here are 10 common questions and answers related to the application of LT1790ACS6-3.3#TRMPBF in technical solutions:
Q: What is the LT1790ACS6-3.3#TRMPBF? A: The LT1790ACS6-3.3#TRMPBF is a low dropout voltage reference IC that provides a stable 3.3V output voltage.
Q: What is the typical application of the LT1790ACS6-3.3#TRMPBF? A: It is commonly used as a precision voltage reference in various electronic systems and circuits.
Q: What is the dropout voltage of the LT1790ACS6-3.3#TRMPBF? A: The dropout voltage is typically very low, around 300mV at 10mA load current.
Q: Can the LT1790ACS6-3.3#TRMPBF be used in battery-powered applications? A: Yes, it can be used in battery-powered applications due to its low dropout voltage and low quiescent current.
Q: What is the temperature range for the LT1790ACS6-3.3#TRMPBF? A: The operating temperature range is typically -40°C to +125°C.
Q: Is the LT1790ACS6-3.3#TRMPBF available in other output voltage options? A: Yes, it is available in various output voltage options, including 2.5V, 3.0V, 4.096V, etc.
Q: What is the accuracy of the LT1790ACS6-3.3#TRMPBF? A: The initial accuracy is typically ±0.05% and can be further improved with calibration.
Q: Can the LT1790ACS6-3.3#TRMPBF handle high load currents? A: It is designed to handle load currents up to 10mA without significant voltage drop.
Q: Does the LT1790ACS6-3.3#TRMPBF require external components for operation? A: No, it is a standalone voltage reference that does not require any external components.
Q: What package does the LT1790ACS6-3.3#TRMPBF come in? A: It comes in a small SOT-23 package, which is suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.