Linear Technology/QD Devices
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
LTC1326CMS8-2.5#PBF
عرض التفاصيل جداول البيانات

LTC1326CMS8-2.5#PBF

Product Overview

Category

The LTC1326CMS8-2.5#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption

Package

The LTC1326CMS8-2.5#PBF is available in an 8-pin MSOP package.

Essence

The essence of this product lies in its ability to regulate voltage efficiently, ensuring stable power supply to electronic devices.

Packaging/Quantity

The LTC1326CMS8-2.5#PBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 2.5V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. VOUT: Output voltage pin
  6. NC: No connection
  7. NC: No connection
  8. NC: No connection

Functional Features

  • Voltage regulation: The LTC1326CMS8-2.5#PBF ensures a stable output voltage of 2.5V regardless of input voltage fluctuations.
  • Low dropout voltage: With a dropout voltage of only 200mV at 100mA, this IC minimizes power loss and maximizes efficiency.
  • Low quiescent current: The quiescent current of 40µA ensures minimal power consumption during standby or idle modes.
  • Enable pin: The EN pin allows for easy on/off control of the voltage regulator.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size
  • Low power consumption
  • Easy on/off control

Disadvantages

  • Limited output current (up to 100mA)
  • Narrow input voltage range (2.7V to 5.5V)

Working Principles

The LTC1326CMS8-2.5#PBF utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable 2.5V output. The enable pin allows for easy control of the regulator's operation.

Detailed Application Field Plans

The LTC1326CMS8-2.5#PBF finds applications in various electronic devices, including but not limited to: 1. Battery-powered devices: Provides stable voltage supply for portable electronics such as smartphones, tablets, and wearables. 2. IoT devices: Ensures reliable power management for Internet of Things devices, enabling efficient operation and longer battery life. 3. Industrial equipment: Used in industrial automation systems, sensors, and control circuits to maintain consistent power supply.

Detailed and Complete Alternative Models

  1. LM1117-2.5: A popular alternative with similar specifications and package options.
  2. LT1763-2.5: Offers higher output current capability while maintaining low dropout voltage.
  3. MCP1702-2.5: Cost-effective alternative suitable for low-power applications.

Please note that these alternative models may have slight variations in characteristics and pin configuration compared to the LTC1326CMS8-2.5#PBF.

Word count: 515 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق LTC1326CMS8-2.5#PBF في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of LTC1326CMS8-2.5#PBF in technical solutions:

  1. Q: What is LTC1326CMS8-2.5#PBF? A: LTC1326CMS8-2.5#PBF is a specific model of a low dropout (LDO) voltage regulator.

  2. Q: What is the input voltage range for LTC1326CMS8-2.5#PBF? A: The input voltage range for LTC1326CMS8-2.5#PBF is typically between 2.7V and 15V.

  3. Q: What is the output voltage of LTC1326CMS8-2.5#PBF? A: The output voltage of LTC1326CMS8-2.5#PBF is fixed at 2.5V.

  4. Q: What is the maximum output current of LTC1326CMS8-2.5#PBF? A: The maximum output current of LTC1326CMS8-2.5#PBF is typically around 250mA.

  5. Q: What is the dropout voltage of LTC1326CMS8-2.5#PBF? A: The dropout voltage of LTC1326CMS8-2.5#PBF is typically around 300mV.

  6. Q: Can LTC1326CMS8-2.5#PBF be used in battery-powered applications? A: Yes, LTC1326CMS8-2.5#PBF can be used in battery-powered applications due to its low dropout voltage and low quiescent current.

  7. Q: Is LTC1326CMS8-2.5#PBF suitable for automotive applications? A: Yes, LTC1326CMS8-2.5#PBF is suitable for automotive applications as it can operate in a wide temperature range and has built-in protection features.

  8. Q: Can I use LTC1326CMS8-2.5#PBF to power microcontrollers or other digital ICs? A: Yes, LTC1326CMS8-2.5#PBF can be used to power microcontrollers, digital ICs, and other low-power devices.

  9. Q: Does LTC1326CMS8-2.5#PBF require any external components for operation? A: Yes, LTC1326CMS8-2.5#PBF requires input and output capacitors for stability and proper operation.

  10. Q: What package does LTC1326CMS8-2.5#PBF come in? A: LTC1326CMS8-2.5#PBF comes in an 8-pin MSOP (Mini Small Outline Package) with exposed pad for better thermal performance.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidelines.