Littelfuse Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
3KP6.0CA-B
عرض التفاصيل جداول البيانات

3KP6.0CA-B Product Overview

Introduction

The 3KP6.0CA-B belongs to the category of transient voltage suppressor diodes and is widely used for surge protection in various electronic circuits. This entry provides a comprehensive overview of the 3KP6.0CA-B, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Surge protection in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-201AD (DO-27)
  • Essence: Protects sensitive electronic components from voltage transients
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Peak Pulse Power: 3000W
  • Standoff Voltage: 6.0V
  • Breakdown Voltage: 6.67V - 7.37V
  • Maximum Clamping Voltage: 9.2V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 3KP6.0CA-B typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Provides effective protection against voltage transients
  • Fast response time ensures minimal impact on the protected circuit
  • High surge capability allows it to handle large transient currents

Advantages and Disadvantages

Advantages

  • High surge capability
  • Low clamping voltage
  • Fast response time

Disadvantages

  • Limited to specific voltage ratings
  • May require additional circuitry for comprehensive surge protection

Working Principles

When a voltage transient occurs, the 3KP6.0CA-B conducts current to divert the excess energy away from the protected circuit, thereby limiting the voltage across it.

Detailed Application Field Plans

The 3KP6.0CA-B is commonly used in: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the 3KP6.0CA-B include: - 1.5KE6.0A - P6SMB6.0A - SA6.0A

In conclusion, the 3KP6.0CA-B transient voltage suppressor diode offers reliable surge protection for various electronic applications, with its high surge capability, low clamping voltage, and fast response time making it a popular choice among engineers and designers.

[Word Count: 411]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 3KP6.0CA-B في الحلول التقنية

  1. What is the 3KP6.0CA-B component used for in technical solutions?

    • The 3KP6.0CA-B component is commonly used as a transient voltage suppressor to protect sensitive electronic equipment from voltage spikes and surges.

  2. What is the maximum voltage rating of the 3KP6.0CA-B component?

    • The 3KP6.0CA-B has a maximum voltage rating of 6.0 volts, making it suitable for applications where protection against lower voltage transients is required.

  3. What are the typical applications of the 3KP6.0CA-B component?

    • Typical applications of the 3KP6.0CA-B include protection of integrated circuits, power supplies, communication systems, and other electronic devices from transient overvoltage events.

  4. What is the peak pulse power handling capability of the 3KP6.0CA-B component?

    • The 3KP6.0CA-B component is capable of handling peak pulse power of up to a specified value, typically in the range of several kilowatts.

  5. Is the 3KP6.0CA-B component suitable for use in automotive electronics?

    • Yes, the 3KP6.0CA-B component is often used in automotive electronics to protect sensitive components from voltage transients generated by the vehicle's electrical system.

  6. Does the 3KP6.0CA-B component require any external circuitry for proper operation?

    • The 3KP6.0CA-B component can be used standalone or in conjunction with other protective components, depending on the specific application requirements.

  7. What is the response time of the 3KP6.0CA-B component to a transient voltage event?

    • The 3KP6.0CA-B component typically responds to transient voltage events within nanoseconds, providing rapid protection to the connected circuitry.

  8. Can the 3KP6.0CA-B component be used in high-frequency applications?

    • Yes, the 3KP6.0CA-B component is suitable for use in high-frequency applications due to its fast response time and low capacitance.

  9. What are the environmental operating conditions for the 3KP6.0CA-B component?

    • The 3KP6.0CA-B component is designed to operate within specified temperature and humidity ranges, making it suitable for a wide range of environmental conditions.

  10. Are there any recommended layout considerations when using the 3KP6.0CA-B component on a PCB?

    • It is recommended to minimize the length of traces connecting the 3KP6.0CA-B component to the protected circuitry and to ensure proper grounding for optimal performance.