Meixin Integrated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MAX1508ETA+T
عرض التفاصيل جداول البيانات

MAX1508ETA+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-efficiency, Step-Down DC-DC Converter
  • Package: 8-pin Thin SOT23
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Switching Frequency: 1.6MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX1508ETA+T has the following pin configuration:

  1. GND: Ground connection
  2. SW: Switching node for the internal MOSFET
  3. FB: Feedback input for output voltage regulation
  4. EN: Enable pin for turning the device on/off
  5. LX: Inductor connection
  6. VCC: Supply voltage input
  7. PGND: Power ground connection
  8. SS/TR: Soft-start/Tracking pin for controlling the output voltage ramp-up time

Functional Features

  • High efficiency conversion of input voltage to regulated output voltage
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage through external resistors
  • Internal synchronous rectification for improved efficiency
  • Overcurrent and thermal protection features
  • Soft-start function for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power dissipation - Small package size enables space-saving designs - Wide input voltage range provides flexibility in power supply selection - Internal protection features enhance system reliability

Disadvantages: - Limited maximum output current may restrict certain high-power applications - Requires external components for proper operation

Working Principles

The MAX1508ETA+T is a step-down DC-DC converter that utilizes pulse-width modulation (PWM) to regulate the output voltage. It operates by switching the internal MOSFET on and off at a high frequency, which controls the energy transfer from the input to the output. The feedback pin monitors the output voltage and adjusts the duty cycle of the PWM signal to maintain a stable output voltage.

Detailed Application Field Plans

The MAX1508ETA+T is commonly used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - Industrial equipment - Automotive systems - Distributed power supplies

Detailed and Complete Alternative Models

  1. MAX1509ETA+T: Similar specifications and features as MAX1508ETA+T, but with a different package (8-pin µMAX)
  2. MAX1510ETA+T: Higher maximum output current (2A) and wider input voltage range (2.5V to 16V), otherwise similar to MAX1508ETA+T
  3. MAX1511ETA+T: Lower maximum output current (1A) and lower input voltage range (2.5V to 4.5V), otherwise similar to MAX1508ETA+T

These alternative models provide options based on specific requirements and constraints of different applications.

Word count: 400 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MAX1508ETA+T في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MAX1508ETA+T in technical solutions:

  1. Q: What is the MAX1508ETA+T? A: The MAX1508ETA+T is a high-efficiency, step-down DC-DC converter IC designed for use in various technical solutions.

  2. Q: What is the input voltage range of the MAX1508ETA+T? A: The input voltage range of the MAX1508ETA+T is typically between 4.5V and 23V.

  3. Q: What is the output voltage range of the MAX1508ETA+T? A: The output voltage range of the MAX1508ETA+T can be adjusted from 0.8V to 16V.

  4. Q: What is the maximum output current of the MAX1508ETA+T? A: The maximum output current of the MAX1508ETA+T is typically around 2A.

  5. Q: Can the MAX1508ETA+T operate with a wide temperature range? A: Yes, the MAX1508ETA+T is designed to operate within a temperature range of -40°C to +85°C.

  6. Q: Does the MAX1508ETA+T have built-in protection features? A: Yes, the MAX1508ETA+T includes overcurrent protection, thermal shutdown, and undervoltage lockout features.

  7. Q: Can the MAX1508ETA+T be used in battery-powered applications? A: Yes, the MAX1508ETA+T is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  8. Q: Is the MAX1508ETA+T easy to integrate into existing designs? A: Yes, the MAX1508ETA+T is available in a compact, space-saving package and requires minimal external components for operation.

  9. Q: Can the MAX1508ETA+T be used in automotive applications? A: Yes, the MAX1508ETA+T is automotive-grade and can be used in various automotive systems.

  10. Q: Are there any application notes or reference designs available for the MAX1508ETA+T? A: Yes, Maxim Integrated provides application notes and reference designs that can help with the implementation of the MAX1508ETA+T in different technical solutions.

Please note that these answers are general and may vary depending on specific use cases and requirements. It's always recommended to refer to the datasheet and relevant documentation provided by the manufacturer for accurate information.