MAX9119EXK-T

Product Overview

• Category: Integrated Circuit (IC)
• Use: High-Speed Differential Line Receiver
• Characteristics: Low power consumption, high-speed data transmission, differential signaling support
• Package: SC70-5
• Essence: The MAX9119EXK-T is a high-speed differential line receiver designed for use in various applications requiring reliable and fast data transmission over long distances.
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage Range: 3.0V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Data Rate: Up to 2.5Gbps
• Input Common-Mode Range: -1V to +2V
• Output Voltage Swing: 400mV (differential)
• Propagation Delay: 200ps (typical)

Pin Configuration

The MAX9119EXK-T has the following pin configuration:

```

---

| | --| VCC GND |-- Pin 1: Power Supply --| IN+ IN- |-- Pin 2: Differential Input --| OUT+ OUT- |-- Pin 3: Differential Output --| NC NC |-- Pin 4: No Connection --| EN NC |-- Pin 5: Enable Input |___________| ```

Functional Features

• High-speed differential line receiver
• Supports differential signaling for noise immunity
• Wide input common-mode range for compatibility with different signal levels
• Low power consumption for energy-efficient operation
• Small package size for space-constrained applications

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Reliable performance over long distances - Low power consumption - Differential signaling support for noise rejection

Disadvantages: - Limited input common-mode range - Requires external enable signal for operation

Working Principles

The MAX9119EXK-T is designed to receive high-speed differential signals and convert them into single-ended outputs. It operates by amplifying and converting the differential input signals into a single-ended output that can be easily processed by downstream circuitry.

The device utilizes differential signaling, which involves transmitting data over two complementary lines. This technique provides better noise immunity and allows for longer transmission distances compared to single-ended signaling.

The MAX9119EXK-T also features a wide input common-mode range, allowing it to accommodate different signal levels. This makes it suitable for use in various applications where the input signal voltage may vary.

Detailed Application Field Plans

The MAX9119EXK-T can be used in a wide range of applications, including:

1. High-speed data communication systems
2. Industrial automation and control systems
3. Automotive electronics
4. Medical equipment
5. Test and measurement instruments

In these applications, the MAX9119EXK-T enables reliable and fast data transmission, ensuring accurate and timely communication between devices.

Detailed and Complete Alternative Models

• MAX9117: Differential Line Receiver with Lower Data Rate (Up to 500Mbps)
• MAX9118: Differential Line Receiver with Higher Data Rate (Up to 3.2Gbps)
• MAX9120: Differential Line Driver and Receiver Pair for Full-Duplex Communication

These alternative models offer different data rates and additional features to suit specific application requirements.

Word count: 410 words