AT28C64-25JC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used for non-volatile storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
AT28C64-25JC is available in a 32-pin plastic J-lead chip carrier (PLCC) package.
The essence of AT28C64-25JC lies in its ability to store and retrieve digital information reliably and efficiently.
This product is typically packaged in reels or tubes, with each containing a specific quantity of AT28C64-25JC chips. The exact quantity may vary depending on the supplier.
AT28C64-25JC utilizes a combination of electronic circuits and floating gate transistors to store and retrieve digital information. When data is written, an electrical charge is trapped in the floating gate, altering the transistor's behavior. This charge can be removed during the erasing process, allowing the transistor to return to its original state.
AT28C64-25JC finds applications in various fields, including: 1. Embedded systems: Used for firmware storage in microcontrollers and other embedded devices. 2. Computer memory expansion: Provides additional non-volatile storage for computers. 3. Consumer electronics: Used in devices such as digital cameras, printers, and set-top boxes for data storage purposes. 4. Automotive electronics: Utilized in automotive control units for storing critical data and firmware.
These alternative models offer different specifications and capacities, providing options based
Sure! Here are 10 common questions and answers related to the application of AT28C64-25JC in technical solutions:
Q: What is the AT28C64-25JC? A: The AT28C64-25JC is a 64K (8K x 8) CMOS electrically erasable programmable read-only memory (EEPROM) chip.
Q: What is the operating voltage range for the AT28C64-25JC? A: The AT28C64-25JC operates within a voltage range of 4.5V to 5.5V.
Q: How much data can the AT28C64-25JC store? A: The AT28C64-25JC can store up to 64 kilobits (8 kilobytes) of data.
Q: What is the access time of the AT28C64-25JC? A: The AT28C64-25JC has an access time of 250 nanoseconds (ns).
Q: Can the AT28C64-25JC be reprogrammed multiple times? A: Yes, the AT28C64-25JC is electrically erasable and can be reprogrammed multiple times.
Q: What is the endurance of the AT28C64-25JC? A: The AT28C64-25JC has a minimum endurance of 100,000 erase/write cycles.
Q: Does the AT28C64-25JC require any external power supply circuits? A: Yes, the AT28C64-25JC requires a VCC power supply and a VSS ground connection.
Q: Can the AT28C64-25JC operate in a wide temperature range? A: Yes, the AT28C64-25JC is designed to operate within a temperature range of -40°C to +85°C.
Q: What is the package type of the AT28C64-25JC? A: The AT28C64-25JC comes in a 32-lead PLCC (Plastic Leaded Chip Carrier) package.
Q: Are there any special considerations for programming the AT28C64-25JC? A: Yes, it is important to follow the manufacturer's recommended programming voltage and timing specifications for successful programming.
Please note that these answers are based on general information about the AT28C64-25JC and may vary depending on specific application requirements.