AT28HC256E-12TI belongs to the category of high-speed, low-power Electrically Erasable Programmable Read-Only Memory (EEPROM) chips.
This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
The AT28HC256E-12TI is available in a standard 28-pin Thin Small Outline Package (TSOP). It is typically sold in reels or tubes containing multiple units.
The AT28HC256E-12TI has a total of 28 pins, each serving a specific function. The pin configuration is as follows:
The AT28HC256E-12TI utilizes EEPROM technology, which allows for non-volatile data storage. It uses electrically controlled floating gate transistors to store and retrieve data. When data needs to be written, a high voltage is applied to the control gate, which traps electrons in the floating gate. This alters the transistor's threshold voltage, representing a binary value. To read data, the transistor's threshold voltage is measured, determining the stored information.
The AT28HC256E-12TI finds applications in various fields, including: 1. Microcontrollers: Used for storing firmware, configuration data, and calibration values. 2. Computers: Used for storing BIOS settings, system parameters, and encryption keys. 3. Consumer Electronics: Used for storing user preferences, device settings, and firmware updates.
Several alternative models with similar specifications and features are available as alternatives to the AT28HC256E-12TI. Some notable options include: - AT28C256 - AT28HC256 - AT28BV256 - AT28LV256
These alternative models offer compatibility and can be used as drop-in replacements for the AT28HC256E-12TI in many applications.
In conclusion, the AT28HC256E-12TI is a high-speed, low-power EEPROM chip that provides reliable non-volatile data storage. With its large capacity, wide
Sure! Here are 10 common questions and answers related to the application of AT28HC256E-12TI in technical solutions:
Q: What is the AT28HC256E-12TI? A: The AT28HC256E-12TI is a high-speed, low-power CMOS 256K (32K x 8) EEPROM memory chip.
Q: What are the key features of the AT28HC256E-12TI? A: The key features include a 120ns access time, low power consumption, byte-wise programming, and a wide operating voltage range.
Q: What are some typical applications for the AT28HC256E-12TI? A: Some typical applications include microcontroller systems, data storage, industrial control systems, automotive electronics, and medical devices.
Q: How does the AT28HC256E-12TI connect to a microcontroller or other devices? A: The AT28HC256E-12TI uses a standard parallel interface, typically connected to the address bus, data bus, and control signals of the microcontroller or other devices.
Q: Can the AT28HC256E-12TI be used for code storage in microcontrollers? A: Yes, the AT28HC256E-12TI can be used for code storage in microcontrollers that support external memory.
Q: What is the maximum operating frequency of the AT28HC256E-12TI? A: The AT28HC256E-12TI can operate at frequencies up to 20MHz.
Q: Does the AT28HC256E-12TI require any special programming equipment? A: No, the AT28HC256E-12TI can be programmed using standard EEPROM programming equipment.
Q: Can the AT28HC256E-12TI be reprogrammed multiple times? A: Yes, the AT28HC256E-12TI supports multiple reprogramming cycles, making it suitable for applications that require frequent updates.
Q: What is the data retention period of the AT28HC256E-12TI? A: The AT28HC256E-12TI has a minimum data retention period of 10 years.
Q: Is the AT28HC256E-12TI compatible with both 3.3V and 5V systems? A: Yes, the AT28HC256E-12TI is designed to operate with a wide voltage range of 2.7V to 5.5V, making it compatible with both 3.3V and 5V systems.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.