Microchip Technology
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
KSZ8895MQXI
عرض التفاصيل جداول البيانات

KSZ8895MQXI

Product Overview

Category

KSZ8895MQXI belongs to the category of Ethernet Switches.

Use

It is primarily used for network communication and data transmission in various applications.

Characteristics

  • High-speed data transfer
  • Reliable performance
  • Low power consumption
  • Compact size

Package

The KSZ8895MQXI comes in a small form factor package, making it suitable for space-constrained designs.

Essence

The essence of KSZ8895MQXI lies in its ability to efficiently manage network traffic and ensure reliable connectivity.

Packaging/Quantity

The product is typically packaged individually and is available in various quantities depending on the customer's requirements.

Specifications

  • Data Transfer Rate: Up to 1 Gbps
  • Number of Ports: 5
  • Supported Protocols: IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, etc.
  • Power Supply: 3.3V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The KSZ8895MQXI has a detailed pin configuration as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage | | 2 | VSS | Ground | | 3 | TXD0 | Transmit Data 0 | | 4 | TXD1 | Transmit Data 1 | | 5 | TXD2 | Transmit Data 2 | | ... | ... | ... |

Functional Features

  • VLAN support for efficient network segmentation
  • Quality of Service (QoS) prioritization for optimized data flow
  • Auto-negotiation for seamless compatibility with different devices
  • Energy-efficient Ethernet (EEE) for reduced power consumption
  • Integrated diagnostic features for network troubleshooting

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables fast and efficient communication.
  • Compact size allows for easy integration into various devices.
  • Low power consumption helps in energy-efficient designs.
  • Integrated diagnostic features aid in network maintenance.

Disadvantages

  • Limited number of ports may not be suitable for larger network setups.
  • Higher cost compared to basic Ethernet switches.

Working Principles

The KSZ8895MQXI operates based on the principles of Ethernet switching. It receives incoming data packets, examines their destination addresses, and forwards them to the appropriate port for transmission. The switch also manages network traffic by implementing various protocols and features such as VLANs and QoS.

Detailed Application Field Plans

The KSZ8895MQXI is widely used in the following application fields:

  1. Industrial Automation: Enables reliable and high-speed communication between industrial devices and control systems.
  2. Home Networking: Facilitates seamless connectivity among various home devices, such as smart TVs, gaming consoles, and computers.
  3. Internet of Things (IoT): Supports efficient data transmission in IoT networks, connecting numerous devices and sensors.
  4. Telecommunications: Used in networking equipment for efficient data routing and transmission.

Detailed and Complete Alternative Models

Some alternative models to KSZ8895MQXI include:

  1. KSZ8863MLL: A similar Ethernet switch with 3 ports and lower power consumption.
  2. KSZ9477R: A higher-end switch with 7 ports and advanced management features.
  3. KSZ9896PI: A switch designed specifically for automotive applications, with enhanced ruggedness and reliability.

These alternative models offer different features and specifications to cater to diverse requirements.

Word count: 511 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق KSZ8895MQXI في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of KSZ8895MQXI in technical solutions:

  1. Q: What is KSZ8895MQXI? A: KSZ8895MQXI is a highly integrated Ethernet switch IC designed for use in various networking applications.

  2. Q: What are the key features of KSZ8895MQXI? A: Some key features include 5-port 10/100 managed Ethernet switch, support for VLANs, QoS, IGMP snooping, and multiple management interfaces.

  3. Q: Can KSZ8895MQXI be used in industrial applications? A: Yes, KSZ8895MQXI is suitable for industrial applications due to its robust design, wide temperature range, and support for industrial protocols.

  4. Q: How many ports does KSZ8895MQXI support? A: KSZ8895MQXI supports 5 ports, which can be configured as either 10 Mbps or 100 Mbps Ethernet ports.

  5. Q: Does KSZ8895MQXI support Power over Ethernet (PoE)? A: No, KSZ8895MQXI does not support PoE. It is primarily focused on providing Ethernet switching functionality.

  6. Q: Can KSZ8895MQXI be used in automotive applications? A: Yes, KSZ8895MQXI is suitable for automotive applications due to its automotive-grade qualification and support for automotive protocols.

  7. Q: What is the power supply voltage range for KSZ8895MQXI? A: The power supply voltage range for KSZ8895MQXI is typically between 3.3V and 3.6V.

  8. Q: Does KSZ8895MQXI support jumbo frames? A: Yes, KSZ8895MQXI supports jumbo frames up to 9 KB in size, which can be beneficial for certain applications that require large data transfers.

  9. Q: Can KSZ8895MQXI be used in PoE switch designs? A: While KSZ8895MQXI itself does not support PoE, it can be used in conjunction with external PoE controllers or ICs to enable PoE functionality in switch designs.

  10. Q: What are the available management interfaces for KSZ8895MQXI? A: KSZ8895MQXI supports various management interfaces, including SPI, I2C, and MDC/MDIO, providing flexibility for system integration and control.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.