MCP6474T-E/ST

Product Overview

Category

MCP6474T-E/ST belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for various applications, including signal amplification and processing.

Characteristics

• Integrated circuit type: Operational Amplifier (Op-Amp)
• Supply voltage range: 2.7V to 5.5V
• Low input offset voltage: ±1.5mV (maximum)
• Rail-to-rail output swing
• Low quiescent current: 500µA (typical)
• Package type: TSSOP-14
• RoHS compliant

Package and Quantity

The MCP6474T-E/ST is available in a TSSOP-14 package. Each package contains one unit of the IC.

Specifications

• Input Offset Voltage: ±1.5mV (maximum)
• Input Bias Current: 10nA (typical)
• Gain Bandwidth Product: 1MHz (typical)
• Slew Rate: 0.6V/µs (typical)
• Common Mode Rejection Ratio: 70dB (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MCP6474T-E/ST has a total of 14 pins arranged as follows:

Pin 1: Non-Inverting Input Pin 2: Inverting Input Pin 3: V- Pin 4: Output Pin 5: NC (No Connection) Pin 6: V+ Pin 7: NC Pin 8: NC Pin 9: NC Pin 10: NC Pin 11: NC Pin 12: NC Pin 13: NC Pin 14: NC

Functional Features

• Low input offset voltage for accurate signal amplification
• Rail-to-rail output swing allows for maximum utilization of the supply voltage range
• Low quiescent current ensures power efficiency
• Wide operating temperature range enables usage in various environments
• RoHS compliance ensures environmental friendliness

Advantages and Disadvantages

Advantages

• Accurate signal amplification due to low input offset voltage
• Versatile rail-to-rail output swing for flexible applications
• Power-efficient operation with low quiescent current
• Suitable for a wide range of operating temperatures
• Environmentally friendly with RoHS compliance

Disadvantages

• Limited pin configuration options
• Relatively low gain bandwidth product compared to some alternative models

Working Principles

The MCP6474T-E/ST is an operational amplifier that amplifies and processes input signals. It operates by comparing the voltages at its non-inverting and inverting inputs, and produces an amplified output signal based on this comparison. The rail-to-rail output swing allows the output signal to reach the full range of the supply voltage.

Detailed Application Field Plans

The MCP6474T-E/ST can be used in various applications, including: 1. Audio amplifiers 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Industrial control systems

Detailed Alternative Models

Some alternative models to the MCP6474T-E/ST include: 1. LM324 2. TL071 3. AD822 4. LT1498 5. MAX4239

These alternative models offer similar functionalities and can be considered as substitutes for the MCP6474T-E/ST in different applications.

Word count: 409 words