TS80C32X2-MCC

Product Overview

Category

The TS80C32X2-MCC belongs to the category of microcontrollers.

Use

This microcontroller is primarily used for embedded systems and applications that require high-performance computing capabilities.

Characteristics

• High processing speed
• Low power consumption
• Compact size
• Wide operating voltage range
• Extensive peripheral integration

Package

The TS80C32X2-MCC is available in a compact and durable package, ensuring easy integration into various electronic devices.

Essence

The essence of the TS80C32X2-MCC lies in its advanced architecture and powerful processing capabilities, making it suitable for demanding applications.

Packaging/Quantity

The TS80C32X2-MCC is typically packaged in trays or reels, with quantities varying based on customer requirements.

Specifications

• Microcontroller type: 8-bit
• Clock frequency: Up to 40 MHz
• Program memory: 32 KB
• Data memory: 1.5 KB
• I/O pins: 32
• Serial communication interfaces: UART, SPI, I2C
• Analog-to-digital converter: 10-bit resolution
• Operating voltage: 2.7V to 5.5V
• Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The TS80C32X2-MCC features a total of 40 pins, each serving a specific purpose. The detailed pin configuration is as follows:

1. VCC - Power supply
2. GND - Ground
3. P0.0 - General-purpose I/O pin
4. P0.1 - General-purpose I/O pin
5. P0.2 - General-purpose I/O pin
6. P0.3 - General-purpose I/O pin
7. P0.4 - General-purpose I/O pin
8. P0.5 - General-purpose I/O pin
9. P0.6 - General-purpose I/O pin
10. P0.7 - General-purpose I/O pin
11. RST - Reset pin
12. P1.0 - General-purpose I/O pin
13. P1.1 - General-purpose I/O pin
14. P1.2 - General-purpose I/O pin
15. P1.3 - General-purpose I/O pin
16. P1.4 - General-purpose I/O pin
17. P1.5 - General-purpose I/O pin
18. P1.6 - General-purpose I/O pin
19. P1.7 - General-purpose I/O pin
20. XTAL1 - Crystal oscillator input
21. XTAL2 - Crystal oscillator output
22. EA/VPP - External Access/Programming Enable
23. ALE/PROG - Address Latch Enable/Program pulse
24. PSEN - Program Store Enable
25. P2.0 - General-purpose I/O pin
26. P2.1 - General-purpose I/O pin
27. P2.2 - General-purpose I/O pin
28. P2.3 - General-purpose I/O pin
29. P2.4 - General-purpose I/O pin
30. P2.5 - General-purpose I/O pin
31. P2.6 - General-purpose I/O pin
32. P2.7 - General-purpose I/O pin
33. RXD - Serial data input
34. TXD - Serial data output
35. INT0 - External interrupt 0
36. INT1 - External interrupt 1
37. T0 - Timer 0 input
38. T1 - Timer 1 input
39. WR - External data memory write strobe
40. RD - External data memory read strobe

Functional Features

The TS80C32X2-MCC offers several functional features that enhance its usability and performance:

• High-speed processing capabilities for efficient execution of complex algorithms.
• Integrated serial communication interfaces (UART, SPI, I2C) for seamless connectivity with external devices.
• On-chip analog-to-digital converter for precise measurement and control of analog signals.
• Flexible I/O pins for interfacing with various sensors, actuators, and peripherals.
• Built-in timers and interrupts to facilitate time-critical operations.
• Low power consumption modes for energy-efficient applications.

Advantages and Disadvantages

Advantages

• High processing speed enables rapid execution of tasks.
• Compact size allows for easy integration into space-constrained designs.
• Wide operating voltage range ensures compatibility with different power supply configurations.
• Extensive peripheral integration reduces the need for additional external components.
• Low power consumption prolongs battery life in portable applications.

Disadvantages

• Limited program and data memory may restrict the complexity of applications.
• Lack of advanced features found in more