Microchip Technology
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TS80C51RD2-LCB
عرض التفاصيل جداول البيانات

TS80C51RD2-LCB

Product Overview

Category

The TS80C51RD2-LCB belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit microcontroller
  • Based on the 8051 architecture
  • Offers a wide range of integrated peripherals
  • Low power consumption
  • Suitable for both small-scale and large-scale applications

Package

The TS80C51RD2-LCB comes in a compact and durable package, ensuring easy integration into electronic circuits.

Essence

The essence of the TS80C51RD2-LCB lies in its ability to provide efficient control and processing capabilities in a wide range of applications.

Packaging/Quantity

This microcontroller is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 33 MHz
  • Program Memory Size: 64 KB
  • Data Memory Size: 256 bytes
  • Number of I/O Pins: 32
  • Operating Voltage Range: 2.7V to 5.5V
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The TS80C51RD2-LCB has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. P0.0 - General-purpose I/O pin
  4. P0.1 - General-purpose I/O pin
  5. P0.2 - General-purpose I/O pin
  6. P0.3 - General-purpose I/O pin
  7. P0.4 - General-purpose I/O pin
  8. P0.5 - General-purpose I/O pin
  9. P0.6 - General-purpose I/O pin
  10. P0.7 - General-purpose I/O pin
  11. RST - Reset pin
  12. P1.0 - General-purpose I/O pin
  13. P1.1 - General-purpose I/O pin
  14. P1.2 - General-purpose I/O pin
  15. P1.3 - General-purpose I/O pin
  16. P1.4 - General-purpose I/O pin
  17. P1.5 - General-purpose I/O pin
  18. P1.6 - General-purpose I/O pin
  19. P1.7 - General-purpose I/O pin
  20. XTAL1 - Crystal oscillator input
  21. XTAL2 - Crystal oscillator output
  22. EA/VPP - External Access/Programming Enable
  23. ALE/PROG - Address Latch Enable/Program pulse
  24. PSEN - Program Store Enable
  25. P2.0 - General-purpose I/O pin
  26. P2.1 - General-purpose I/O pin
  27. P2.2 - General-purpose I/O pin
  28. P2.3 - General-purpose I/O pin
  29. P2.4 - General-purpose I/O pin
  30. P2.5 - General-purpose I/O pin
  31. P2.6 - General-purpose I/O pin
  32. P2.7 - General-purpose I/O pin
  33. P3.0 - General-purpose I/O pin
  34. P3.1 - General-purpose I/O pin
  35. P3.2 - General-purpose I/O pin
  36. P3.3 - General-purpose I/O pin
  37. P3.4 - General-purpose I/O pin
  38. P3.5 - General-purpose I/O pin
  39. P3.6 - General-purpose I/O pin
  40. P3.7 - General-purpose I/O pin

Functional Features

The TS80C51RD2-LCB offers several functional features that enhance its usability and performance:

  1. High-Speed Processing: With a CPU speed of up to 33 MHz, this microcontroller can handle complex tasks efficiently.
  2. Integrated Peripherals: The TS80C51RD2-LCB includes UART, SPI, and I2C communication interfaces, allowing seamless connectivity with other devices.
  3. Timers/Counters: Three built-in timers/counters enable precise timing and event counting operations.
  4. Analog-to-Digital Converter (ADC): The integrated ADC with 8 channels and 10-bit resolution enables accurate analog signal conversion.

Advantages and Disadvantages

Advantages

  • High-performance capabilities
  • Wide range of integrated peripherals
  • Low power consumption
  • Suitable for various applications
  • Compact and durable package

#

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TS80C51RD2-LCB في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of TS80C51RD2-LCB in technical solutions:

  1. Q: What is the TS80C51RD2-LCB microcontroller used for? A: The TS80C51RD2-LCB is a microcontroller commonly used in embedded systems for various applications such as industrial control, automation, and consumer electronics.

  2. Q: What is the maximum clock frequency supported by the TS80C51RD2-LCB? A: The TS80C51RD2-LCB supports a maximum clock frequency of 33 MHz.

  3. Q: How much program memory does the TS80C51RD2-LCB have? A: The TS80C51RD2-LCB has 64 KB of on-chip Flash program memory.

  4. Q: Can I expand the program memory of the TS80C51RD2-LCB? A: No, the program memory of the TS80C51RD2-LCB cannot be expanded externally.

  5. Q: What peripherals are available on the TS80C51RD2-LCB? A: The TS80C51RD2-LCB includes features like UART, SPI, I2C, timers/counters, and GPIO pins for interfacing with external devices.

  6. Q: Does the TS80C51RD2-LCB support analog-to-digital conversion (ADC)? A: No, the TS80C51RD2-LCB does not have an on-chip ADC. External ADCs can be used if required.

  7. Q: What voltage levels does the TS80C51RD2-LCB operate at? A: The TS80C51RD2-LCB operates at a voltage range of 2.7V to 5.5V.

  8. Q: Can I use the TS80C51RD2-LCB in battery-powered applications? A: Yes, the low power consumption of the TS80C51RD2-LCB makes it suitable for battery-powered applications.

  9. Q: Is the TS80C51RD2-LCB compatible with standard 8051 development tools? A: Yes, the TS80C51RD2-LCB is fully compatible with standard 8051 development tools and software.

  10. Q: Are there any development boards available for the TS80C51RD2-LCB? A: Yes, there are several development boards available that feature the TS80C51RD2-LCB, making it easier to prototype and develop applications.

Please note that these answers are general and may vary depending on specific implementations or revisions of the TS80C51RD2-LCB microcontroller.