Microchip Technology
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TS87C54X2-MCC
عرض التفاصيل جداول البيانات

TS87C54X2-MCC

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High-performance, low-power consumption, versatile
  • Package: MCC (Microcontroller Chip Carrier)
  • Essence: A microcontroller designed for various control applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 33 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 256 bytes
  • I/O Pins: 32
  • Timers/Counters: 3
  • Serial Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter: 8 channels, 10-bit resolution
  • Operating Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS87C54X2-MCC microcontroller has a total of 40 pins. The pin configuration is as follows:

  1. VCC
  2. P0.0 / AD0
  3. P0.1 / AD1
  4. P0.2 / AD2
  5. P0.3 / AD3
  6. P0.4 / AD4
  7. P0.5 / AD5
  8. P0.6 / AD6
  9. P0.7 / AD7
  10. RST
  11. XTAL1
  12. XTAL2
  13. P1.0 / T2
  14. P1.1 / T2EX
  15. P1.2 / WR
  16. P1.3 / RD
  17. P1.4 / T0
  18. P1.5 / T1
  19. P1.6 / INT0
  20. P1.7 / INT1
  21. EA / VPP
  22. ALE / PROG
  23. PSEN
  24. P2.0 / A8
  25. P2.1 / A9
  26. P2.2 / A10
  27. P2.3 / A11
  28. P2.4 / A12
  29. P2.5 / A13
  30. P2.6 / A14
  31. P2.7 / A15
  32. GND

Functional Features

  • High-performance 8-bit microcontroller suitable for control applications
  • Versatile I/O capabilities with 32 pins for interfacing with external devices
  • Multiple serial communication interfaces (UART, SPI, I2C) for data exchange
  • Built-in analog-to-digital converter for precise measurement and control
  • Three timers/counters for accurate timing and event counting
  • Low-power consumption for energy-efficient designs
  • Wide operating voltage and temperature range for various environments

Advantages and Disadvantages

Advantages: - High-performance and versatile microcontroller - Extensive I/O capabilities for interfacing with external devices - Multiple serial communication interfaces for flexible data exchange - Built-in analog-to-digital converter for precise measurements - Low-power consumption for energy-efficient designs

Disadvantages: - Limited program memory size (8 KB) - Limited RAM size (256 bytes) - Limited number of timers/counters (3)

Working Principles

The TS87C54X2-MCC microcontroller operates based on an 8-bit architecture. It executes instructions stored in its program memory to perform various control tasks. The microcontroller communicates with external devices through its I/O pins and serial communication interfaces. It utilizes timers/counters for accurate timing and event counting. The built-in analog-to-digital converter allows for precise measurement and control of analog signals. The microcontroller operates within a specified voltage and temperature range to ensure reliable performance.

Detailed Application Field Plans

The TS87C54X2-MCC microcontroller finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems for manufacturing processes, robotics, and machinery.
  2. Automotive electronics: Engine management systems, dashboard controls, and vehicle diagnostics.
  3. Home automation: Smart home devices, security systems, and energy management.
  4. Consumer electronics: Remote controls, gaming consoles, and audio/video equipment.
  5. Medical devices: Patient monitoring systems, diagnostic equipment, and medical instruments.
  6. Internet of Things (IoT): Sensor nodes, data acquisition systems, and IoT gateways.

Detailed and Complete Alternative Models

  1. ATmega328P-PU - 8-bit microcontroller by Atmel
  2. PIC16F877A - 8-bit microcontroller by Microchip

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TS87C54X2-MCC في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of TS87C54X2-MCC in technical solutions:

  1. Q: What is the TS87C54X2-MCC microcontroller used for? A: The TS87C54X2-MCC microcontroller is commonly used in various technical solutions that require embedded control, such as industrial automation, robotics, and consumer electronics.

  2. Q: What is the maximum clock frequency supported by the TS87C54X2-MCC? A: The TS87C54X2-MCC microcontroller supports a maximum clock frequency of 33 MHz.

  3. Q: How much program memory does the TS87C54X2-MCC have? A: The TS87C54X2-MCC microcontroller has 8 KB of on-chip Flash program memory.

  4. Q: Can I expand the program memory of the TS87C54X2-MCC? A: No, the program memory of the TS87C54X2-MCC cannot be expanded externally. However, it does support external data memory expansion.

  5. Q: What peripherals are available on the TS87C54X2-MCC? A: The TS87C54X2-MCC microcontroller includes features like UART, SPI, I2C, timers/counters, and GPIO pins for interfacing with various devices and sensors.

  6. Q: Does the TS87C54X2-MCC support analog-to-digital conversion (ADC)? A: Yes, the TS87C54X2-MCC microcontroller has an integrated 8-channel 10-bit ADC for analog signal acquisition.

  7. Q: Can I use the TS87C54X2-MCC for real-time applications? A: Yes, the TS87C54X2-MCC microcontroller is suitable for real-time applications due to its high-performance architecture and interrupt handling capabilities.

  8. Q: What programming languages can I use to program the TS87C54X2-MCC? A: The TS87C54X2-MCC microcontroller can be programmed using assembly language or high-level languages like C or C++.

  9. Q: Is the TS87C54X2-MCC compatible with other microcontrollers or development tools? A: Yes, the TS87C54X2-MCC follows the standard 8051 architecture, making it compatible with other 8051-based microcontrollers and development tools.

  10. Q: Can I use the TS87C54X2-MCC in battery-powered applications? A: Yes, the TS87C54X2-MCC microcontroller has low power consumption features, making it suitable for battery-powered applications where energy efficiency is important.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.