Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
JANTX1N4492D
عرض التفاصيل جداول البيانات

JANTX1N4492D

Product Overview

Category

The JANTX1N4492D is a high-reliability, military-grade semiconductor diode.

Use

It is commonly used in critical applications where reliability and performance are paramount, such as aerospace, defense, and industrial systems.

Characteristics

  • High reliability
  • Military-grade specifications
  • Low forward voltage drop
  • Fast switching speed

Package

The JANTX1N4492D is typically available in a DO-35 package.

Essence

This diode is essential for ensuring the integrity and reliability of electronic systems in demanding environments.

Packaging/Quantity

The JANTX1N4492D is usually supplied in reels or tubes, with quantities varying based on manufacturer and supplier.

Specifications

  • Maximum Forward Voltage: 1V
  • Reverse Voltage: 100V
  • Forward Current: 200mA
  • Reverse Recovery Time: 4ns
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTX1N4492D has two pins, with the anode connected to one pin and the cathode to the other. The pinout configuration is standard for diodes.

Functional Features

  • High reliability under extreme conditions
  • Low power loss
  • Fast response time

Advantages and Disadvantages

Advantages

  • Military-grade reliability
  • Low forward voltage drop
  • Fast switching speed

Disadvantages

  • Limited availability
  • Higher cost compared to commercial diodes

Working Principles

The JANTX1N4492D operates based on the principles of semiconductor physics, utilizing its P-N junction to allow current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

Aerospace

  • Power supply protection
  • Signal conditioning circuits

Defense

  • Radar systems
  • Communication equipment

Industrial Systems

  • Motor control circuits
  • Power conversion

Detailed and Complete Alternative Models

  • JANTX1N4148
  • JANTX1N5806US
  • JANTX1N5550

In conclusion, the JANTX1N4492D is a critical component in high-reliability electronic systems, offering exceptional performance and reliability in demanding environments.

[Word count: 318]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق JANTX1N4492D في الحلول التقنية

  1. What is the JANTX1N4492D diode used for?

    • The JANTX1N4492D diode is commonly used for voltage regulation, signal processing, and power rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N4492D diode?

    • The JANTX1N4492D diode typically has a maximum repetitive peak reverse voltage of 100V, a forward current of 1A, and a forward voltage drop of around 1V.

  3. How does the JANTX1N4492D diode compare to other similar diodes?

    • Compared to other diodes, the JANTX1N4492D offers high reliability, low leakage current, and good temperature stability, making it suitable for demanding technical applications.

  4. Can the JANTX1N4492D diode be used in high-temperature environments?

    • Yes, the JANTX1N4492D diode is designed to operate reliably at elevated temperatures, making it suitable for use in high-temperature technical solutions.

  5. What are some common circuit configurations using the JANTX1N4492D diode?

    • The JANTX1N4492D diode can be used in voltage regulator circuits, rectifier circuits, and signal conditioning circuits in various technical solutions.

  6. Does the JANTX1N4492D diode require any special handling or mounting considerations?

    • The JANTX1N4492D diode should be handled carefully to avoid electrostatic discharge and should be mounted on a suitable heat sink if operating at high currents or in elevated temperature environments.

  7. Are there any known failure modes or reliability concerns with the JANTX1N4492D diode?

    • The JANTX1N4492D diode is known for its high reliability, but like all electronic components, it may fail due to excessive current, voltage spikes, or prolonged exposure to extreme temperatures.

  8. Can the JANTX1N4492D diode be used in automotive applications?

    • Yes, the JANTX1N4492D diode is suitable for use in automotive electronics, provided it meets the specific requirements and standards for automotive-grade components.

  9. What are the typical applications where the JANTX1N4492D diode is commonly used?

    • The JANTX1N4492D diode is commonly used in power supplies, voltage regulators, motor drive circuits, and audio amplifiers, among other technical solutions.

  10. Where can I find detailed application notes and reference designs for using the JANTX1N4492D diode in technical solutions?

    • Detailed application notes and reference designs for the JANTX1N4492D diode can be found in the manufacturer's datasheets, application guides, and technical resources available from authorized distributors and the manufacturer's website.