Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MX1N8180
عرض التفاصيل جداول البيانات

MX1N8180

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23-5
Essence: Regulates input voltage to a precise output voltage
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.8V
  • Dropout Voltage: 150mV at 100mA
  • Maximum Output Current: 150mA
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.1% typical
  • Quiescent Current: 40µA typical
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. NC
  4. VIN
  5. EN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages

  • High precision output voltage
  • Small package size
  • Wide input voltage range
  • Low dropout voltage
  • Low quiescent current

Disadvantages

  • Limited maximum output current
  • Limited operating temperature range

Working Principles

The MX1N8180 is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback mechanism to adjust the internal circuitry, ensuring a consistent output.

Detailed Application Field Plans

The MX1N8180 is suitable for various applications requiring a stable and precise voltage supply, such as: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Sensor modules

Detailed and Complete Alternative Models

  1. LM1117
  2. MCP1700
  3. AP2112
  4. XC6206

In conclusion, the MX1N8180 is a high-precision voltage regulator with a small package size, making it suitable for a wide range of applications in portable and battery-powered devices.

[Word count: 313]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MX1N8180 في الحلول التقنية

  1. What is MX1N8180?

    • MX1N8180 is a high-performance, low-power, and low-noise operational amplifier designed for use in a wide range of technical solutions.

  2. What are the key features of MX1N8180?

    • The key features of MX1N8180 include low input offset voltage, low input bias current, low noise, wide bandwidth, and low power consumption.

  3. In what applications can MX1N8180 be used?

    • MX1N8180 can be used in precision instrumentation, sensor signal conditioning, data acquisition systems, and audio processing applications.

  4. What is the typical supply voltage range for MX1N8180?

    • The typical supply voltage range for MX1N8180 is ±5V to ±15V.

  5. What is the input offset voltage of MX1N8180?

    • The input offset voltage of MX1N8180 is typically 150µV.

  6. What is the input bias current of MX1N8180?

    • The input bias current of MX1N8180 is typically 10pA.

  7. What is the typical noise performance of MX1N8180?

    • The typical noise performance of MX1N8180 is 8nV/√Hz at 1kHz.

  8. Can MX1N8180 operate in single-supply applications?

    • Yes, MX1N8180 can operate in single-supply applications with proper biasing and voltage levels.

  9. What is the unity-gain bandwidth of MX1N8180?

    • The unity-gain bandwidth of MX1N8180 is typically 10MHz.

  10. Is MX1N8180 suitable for battery-powered applications?

    • Yes, MX1N8180's low power consumption and wide supply voltage range make it suitable for battery-powered applications.