Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SMBG5953CE3/TR13
عرض التفاصيل جداول البيانات

SMBG5953CE3/TR13

Introduction

The SMBG5953CE3/TR13 is a semiconductor product belonging to the category of voltage suppressor diodes. This device is commonly used for transient voltage suppression in electronic circuits to protect sensitive components from voltage spikes and transients. The SMBG5953CE3/TR13 exhibits specific characteristics, comes in a particular package, and has distinct advantages and disadvantages.

Basic Information Overview

  • Category: Voltage Suppressor Diode
  • Use: Transient Voltage Suppression
  • Characteristics: High surge capability, low clamping voltage
  • Package: SMB (DO-215AA)
  • Essence: Protecting sensitive electronic components
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Voltage Rating: 64.1V
  • Power Dissipation: 5.0W
  • Breakdown Voltage: 71.2V
  • Clamping Voltage: 103V at 10A
  • Operating Temperature: -55°C to +150°C
  • Storage Temperature: -55°C to +150°C

Detailed Pin Configuration

The SMBG5953CE3/TR13 follows the SMB (DO-215AA) package standard, which consists of two pins. Pin 1 is the anode, and pin 2 is the cathode.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient overvoltages
  • High Surge Capability: Capable of withstanding high surge currents
  • Low Clamping Voltage: Provides efficient protection with minimal voltage drop

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • High surge capability ensures reliability
  • Low clamping voltage minimizes stress on protected circuits

Disadvantages

  • Limited to specific voltage and power ratings
  • May require additional circuitry for comprehensive protection in complex systems

Working Principles

The SMBG5953CE3/TR13 operates by diverting excessive transient current away from sensitive components when a voltage spike occurs. It achieves this through rapid conduction and clamping of the transient voltage to a safe level, thereby safeguarding the connected circuitry.

Detailed Application Field Plans

The SMBG5953CE3/TR13 finds extensive application in various electronic systems, including: - Power Supplies - Communication Equipment - Automotive Electronics - Industrial Control Systems - Consumer Electronics

Detailed and Complete Alternative Models

  • SMBJ64CA: Similar voltage rating and package type
  • P6SMBJ64CA: Higher power dissipation capability
  • SMBJ64A: Lower clamping voltage for more sensitive applications

In conclusion, the SMBG5953CE3/TR13 is a vital component in electronic circuit protection, offering efficient transient voltage suppression and reliable surge capability. Its specific characteristics and working principles make it suitable for diverse applications across different industries.

Word Count: 411

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SMBG5953CE3/TR13 في الحلول التقنية

  1. What is SMBG5953CE3/TR13?

    • SMBG5953CE3/TR13 is a specific model of SMBG (Surface Mount Bridge Rectifier) diode used in electronic circuits.

  2. What are the electrical specifications of SMBG5953CE3/TR13?

    • The electrical specifications include a maximum repetitive peak reverse voltage of 200V, a maximum average forward rectified current of 5A, and a maximum forward voltage drop of 1.0V at 5A.

  3. How is SMBG5953CE3/TR13 typically used in technical solutions?

    • SMBG5953CE3/TR13 is commonly used in power supplies, battery chargers, and other electronic devices to convert alternating current (AC) to direct current (DC).

  4. What are the thermal characteristics of SMBG5953CE3/TR13?

    • The thermal resistance of SMBG5953CE3/TR13 is typically around 10°C/W, indicating its ability to dissipate heat effectively.

  5. Are there any recommended operating conditions for SMBG5953CE3/TR13?

    • It is recommended to operate SMBG5953CE3/TR13 within a temperature range of -65°C to +150°C and to ensure proper heat sinking for optimal performance.

  6. What are the key features of SMBG5953CE3/TR13 that make it suitable for technical solutions?

    • SMBG5953CE3/TR13 offers high surge current capability, low forward voltage drop, and compact surface mount packaging, making it ideal for space-constrained applications.

  7. Can SMBG5953CE3/TR13 be used in automotive electronics?

    • Yes, SMBG5953CE3/TR13 is suitable for automotive electronics due to its robust construction and ability to withstand harsh environmental conditions.

  8. Is SMBG5953CE3/TR13 RoHS compliant?

    • Yes, SMBG5953CE3/TR13 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it environmentally friendly.

  9. What are the potential failure modes of SMBG5953CE3/TR13 in technical solutions?

    • Common failure modes may include overcurrent conditions, thermal overstress, and voltage transients, which should be considered during design and application.

  10. Where can SMBG5953CE3/TR13 be sourced from?

    • SMBG5953CE3/TR13 can be sourced from authorized distributors, such as semiconductor suppliers or electronic component retailers, ensuring genuine and reliable products.