MC16XSD200BFK

Product Overview

• Category: Integrated Circuit
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: BGA (Ball Grid Array)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 18V
• Output Voltage Range: 0.8V to 5.5V
• Output Current: Up to 2A
• Efficiency: Up to 95%
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC16XSD200BFK has a total of 16 pins arranged as follows:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PGND: Power Ground
7. SW: Switching Node
8. BST: Bootstrap Capacitor Connection
9. COMP: Compensation Pin
10. SS: Soft-Start Pin
11. PG: Power Good Indicator
12. NC: No Connection
13. NC: No Connection
14. NC: No Connection
15. NC: No Connection
16. NC: No Connection

Functional Features

• High efficiency power conversion
• Wide input voltage range for versatile applications
• Adjustable output voltage
• Overcurrent protection
• Thermal shutdown protection
• Soft-start function for smooth power-up

Advantages and Disadvantages

Advantages

• High efficiency leads to reduced power consumption
• Wide input voltage range allows compatibility with various power sources
• Compact BGA package saves board space
• Overcurrent and thermal protection ensure safe operation
• Soft-start function prevents inrush current

Disadvantages

• Limited output current capacity (up to 2A)
• Requires external components for proper operation
• Higher cost compared to non-integrated solutions

Working Principles

The MC16XSD200BFK is a voltage regulator integrated circuit that converts an input voltage within the range of 4.5V to 18V into a regulated output voltage between 0.8V and 5.5V. It utilizes a switching topology to achieve high efficiency power conversion. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) controls the device's operation, allowing it to be turned on or off as needed.

Detailed Application Field Plans

The MC16XSD200BFK is commonly used in various applications where efficient power management is required. Some of the typical application fields include:

1. Portable electronic devices: Smartphones, tablets, portable gaming consoles.
2. Industrial equipment: Power supplies for control systems, motor drives, and sensors.
3. Automotive electronics: Infotainment systems, navigation units, lighting control modules.
4. IoT devices: Smart home appliances, wearable devices, wireless sensor networks.
5. Communication systems: Routers, switches, base stations.

Detailed and Complete Alternative Models

1. MC16XSD100BFK: Similar to MC16XSD200BFK but with a lower output current capacity of 1A.
2. MC16XSD300BFK: Similar to MC16XSD200BFK but with a higher output current capacity of 3A.
3. MC16XSD400BFK: Similar to MC16XSD200BFK but with a higher output current capacity of 4A.
4. MC16XSD500BFK: Similar to MC16XSD200BFK but with a higher output current capacity of 5A.

These alternative models provide options for different power requirements in various applications.

Note: The content provided above is a sample and may not reflect the actual specifications and details of the MC16XSD200BFK product.