NXP USA Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MC68HC908JB12JDW
عرض التفاصيل جداول البيانات

MC68HC908JB12JDW

Product Overview

Category: Microcontroller

Use: The MC68HC908JB12JDW is a microcontroller designed for embedded systems applications. It provides control and processing capabilities for various electronic devices.

Characteristics: - Low power consumption - High performance - Small form factor - Integrated peripherals - Flexible I/O options

Package: The MC68HC908JB12JDW is available in a small outline package (SOP) with 28 pins.

Essence: This microcontroller combines a powerful CPU, memory, and peripherals to provide a complete solution for embedded system development.

Packaging/Quantity: The MC68HC908JB12JDW is typically sold in reels or tubes containing multiple units.

Specifications

  • CPU: 8-bit HC08 core
  • Clock Speed: Up to 8 MHz
  • Flash Memory: 12 KB
  • RAM: 512 bytes
  • EEPROM: 256 bytes
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • I/O Pins: 20
  • Timers: 2
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The MC68HC908JB12JDW has a total of 28 pins. Here is the detailed pin configuration:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RESET - Reset input
  4. IRQ - Interrupt request input
  5. PTB0 - General-purpose I/O pin
  6. PTB1 - General-purpose I/O pin
  7. PTB2 - General-purpose I/O pin
  8. PTB3 - General-purpose I/O pin
  9. PTB4 - General-purpose I/O pin
  10. PTB5 - General-purpose I/O pin
  11. PTB6 - General-purpose I/O pin
  12. PTB7 - General-purpose I/O pin
  13. PTC0 - General-purpose I/O pin
  14. PTC1 - General-purpose I/O pin
  15. PTC2 - General-purpose I/O pin
  16. PTC3 - General-purpose I/O pin
  17. PTC4 - General-purpose I/O pin
  18. PTC5 - General-purpose I/O pin
  19. PTC6 - General-purpose I/O pin
  20. PTC7 - General-purpose I/O pin
  21. VCAP - External capacitor connection for internal voltage regulator
  22. XTAL - Crystal oscillator input
  23. EXTAL - Crystal oscillator output
  24. VPP - Programming voltage input
  25. RSTOUT - Reset output
  26. VDDA - Analog power supply voltage
  27. VSSA - Analog ground
  28. ADC - Analog-to-digital converter input

Functional Features

The MC68HC908JB12JDW offers the following functional features:

  • 8-bit HC08 core with enhanced instruction set
  • On-chip flash memory for program storage
  • Integrated RAM and EEPROM for data storage
  • Multiple communication interfaces for connectivity
  • Timers for precise timing control
  • General-purpose I/O pins for flexible interfacing
  • Analog-to-digital converter for analog signal processing

Advantages and Disadvantages

Advantages: - Low power consumption makes it suitable for battery-powered devices - High performance allows for efficient execution of tasks - Small form factor enables compact designs - Integrated peripherals reduce external component count - Flexible I/O options provide versatility in system integration

Disadvantages: - Limited program and data memory compared to higher-end microcontrollers - Restricted number of I/O pins may limit the number of external devices that can be connected

Working Principles

The MC68HC908JB12JDW operates based on the principles of a microcontroller. It executes instructions stored in its flash memory, processes data using its CPU, and interacts with external devices through its I/O pins and communication interfaces. The microcontroller's internal peripherals and timers enable it to perform various tasks, such as controlling motors, reading sensors, and communicating with other devices.

Detailed Application Field Plans

The MC68HC908JB12JDW is suitable for a wide range of embedded system applications, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Medical devices - Consumer electronics

Alternative Models

Here are some alternative models that offer similar functionality to the MC68HC908JB12JDW: - ATmega328P by Microchip - PIC16F877A by Microchip - STM32F103C8T6 by STMicroelectronics - LPC1768 by NXP Semiconductors

These alternative models provide comparable features and capabilities, allowing developers to choose the

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MC68HC908JB12JDW في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MC68HC908JB12JDW in technical solutions:

  1. Q: What is MC68HC908JB12JDW? A: MC68HC908JB12JDW is a microcontroller from the HC08 family, specifically designed for embedded systems and technical solutions.

  2. Q: What are the key features of MC68HC908JB12JDW? A: Some key features include an 8-bit CPU, flash memory, RAM, multiple I/O ports, timers, analog-to-digital converters, and serial communication interfaces.

  3. Q: What are the typical applications of MC68HC908JB12JDW? A: MC68HC908JB12JDW is commonly used in various technical solutions such as industrial automation, automotive electronics, consumer electronics, and medical devices.

  4. Q: How much flash memory does MC68HC908JB12JDW have? A: MC68HC908JB12JDW has 12KB of flash memory, which can be used to store program code and data.

  5. Q: Can MC68HC908JB12JDW communicate with other devices? A: Yes, MC68HC908JB12JDW supports multiple serial communication interfaces like UART, SPI, and I2C, allowing it to communicate with other devices or peripherals.

  6. Q: Does MC68HC908JB12JDW have any analog capabilities? A: Yes, MC68HC908JB12JDW has built-in analog-to-digital converters (ADCs) that can be used to measure analog signals from sensors or other sources.

  7. Q: How many I/O ports are available on MC68HC908JB12JDW? A: MC68HC908JB12JDW has a total of 34 I/O pins, which can be used for various purposes like input, output, or as general-purpose I/O.

  8. Q: Can MC68HC908JB12JDW operate on low power? A: Yes, MC68HC908JB12JDW is designed to operate on low power and has features like power-saving modes and clock gating to minimize power consumption.

  9. Q: Is MC68HC908JB12JDW programmable? A: Yes, MC68HC908JB12JDW can be programmed using assembly language or high-level programming languages like C, using appropriate development tools.

  10. Q: Are there any development tools available for MC68HC908JB12JDW? A: Yes, there are various development tools available, including integrated development environments (IDEs), compilers, debuggers, and programmers, specifically designed for MC68HC908JB12JDW.

Please note that the specific details and answers may vary depending on the context and requirements of the technical solution.