ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MC74ACT125MELG
عرض التفاصيل جداول البيانات

MC74ACT125MELG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Shifter
  • Characteristics: High-speed, low-power consumption
  • Package: SOIC-14
  • Essence: Logic gate buffer/level shifter
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.0V to 6.0V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 100MHz
  • Propagation Delay: 5ns (typical)

Detailed Pin Configuration

The MC74ACT125MELG has a total of 14 pins, which are arranged as follows:

  1. Pin 1: Input A
  2. Pin 2: Output Y
  3. Pin 3: Input B
  4. Pin 4: GND (Ground)
  5. Pin 5: Input C
  6. Pin 6: Output Z
  7. Pin 7: Input D
  8. Pin 8: VCC (Supply Voltage)
  9. Pin 9: NC (No Connection)
  10. Pin 10: NC (No Connection)
  11. Pin 11: NC (No Connection)
  12. Pin 12: NC (No Connection)
  13. Pin 13: NC (No Connection)
  14. Pin 14: NC (No Connection)

Functional Features

  • Logic Level Shifting: The MC74ACT125MELG is designed to shift logic levels from one voltage domain to another.
  • Buffering: It acts as a buffer, providing amplification and isolation between the input and output signals.
  • High-Speed Operation: With a maximum operating frequency of 100MHz, it enables fast signal processing.
  • Low Power Consumption: The IC is designed to consume minimal power, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient signal processing. - Low power consumption prolongs battery life in portable devices. - Logic level shifting capability enables interfacing between different voltage domains.

Disadvantages: - Limited number of input/output channels (4 channels in this case). - Not suitable for applications requiring higher operating frequencies beyond 100MHz.

Working Principles

The MC74ACT125MELG operates based on the principles of digital logic. It utilizes transistors and other electronic components to amplify and shift logic levels. When an input signal is applied, the IC processes it and produces the corresponding output signal according to its internal circuitry.

Detailed Application Field Plans

The MC74ACT125MELG finds applications in various fields, including:

  1. Microcontrollers: It can be used to interface microcontrollers with different voltage requirements.
  2. Communication Systems: The IC facilitates level shifting in communication systems, ensuring compatibility between different voltage standards.
  3. Industrial Automation: It enables signal conversion and buffering in industrial automation systems.
  4. Consumer Electronics: The IC can be utilized in devices such as smartphones, tablets, and gaming consoles for level shifting purposes.

Detailed and Complete Alternative Models

  1. SN74ACT125: Similar logic level shifter IC from Texas Instruments.
  2. CD74ACT125: Equivalent device offered by ON Semiconductor.
  3. 74HCT125: Alternative IC with similar functionality from NXP Semiconductors.

These alternative models provide similar features and can be used as substitutes for the MC74ACT125MELG in various applications.

Word count: 386 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MC74ACT125MELG في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MC74ACT125MELG:

  1. Q: What is MC74ACT125MELG? A: MC74ACT125MELG is a quad buffer/line driver with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the operating voltage range for MC74ACT125MELG? A: The operating voltage range for MC74ACT125MELG is typically between 4.5V and 5.5V.

  3. Q: What is the maximum output current that MC74ACT125MELG can drive? A: MC74ACT125MELG can drive up to 24mA of output current per channel.

  4. Q: Can MC74ACT125MELG be used in both TTL and CMOS applications? A: Yes, MC74ACT125MELG is compatible with both TTL and CMOS logic levels.

  5. Q: What is the purpose of the 3-state outputs in MC74ACT125MELG? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.

  6. Q: How many channels does MC74ACT125MELG have? A: MC74ACT125MELG has four independent channels, each with its own input and output.

  7. Q: What is the propagation delay of MC74ACT125MELG? A: The propagation delay of MC74ACT125MELG is typically around 5ns.

  8. Q: Can MC74ACT125MELG be used in high-speed applications? A: Yes, MC74ACT125MELG is designed for high-speed operation and can be used in applications with fast switching requirements.

  9. Q: Is MC74ACT125MELG available in different package options? A: Yes, MC74ACT125MELG is available in various package options, such as SOIC, TSSOP, and PDIP.

  10. Q: What are some typical applications of MC74ACT125MELG? A: MC74ACT125MELG is commonly used in data communication systems, memory interfaces, bus drivers, and other digital logic applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.