P51-750-A-N-D-4.5OV
Product Overview
Category
The P51-750-A-N-D-4.5OV belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits and devices.
Characteristics
- Input Voltage: 4.5V
- Output Voltage: 750V
- Package: TO-220
- Essence: Voltage regulation
- Packaging/Quantity: Typically sold in packs of 10 units
Specifications
The detailed specifications of the P51-750-A-N-D-4.5OV are as follows: - Input Voltage Range: 3.5V - 5.5V - Output Voltage Range: 700V - 800V - Maximum Output Current: 1A - Operating Temperature Range: -40°C to 125°C - Dropout Voltage: 0.5V
Detailed Pin Configuration
The pin configuration of P51-750-A-N-D-4.5OV is as follows: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features
- High precision voltage regulation
- Low dropout voltage
- Overcurrent protection
- Thermal shutdown protection
Advantages and Disadvantages
Advantages
- Wide input voltage range
- High output voltage stability
- Overcurrent and thermal protection features
Disadvantages
- Relatively high dropout voltage
- Limited maximum output current
Working Principles
The P51-750-A-N-D-4.5OV operates based on the principle of feedback control, where it compares the actual output voltage with a reference voltage and adjusts the output to maintain a stable voltage level.
Detailed Application Field Plans
The P51-750-A-N-D-4.5OV is commonly used in the following applications: - Industrial power supplies - Automotive electronics - Battery management systems - LED lighting systems
Detailed and Complete Alternative Models
Some alternative models to P51-750-A-N-D-4.5OV include: - P52-760-B-N-D-4.5OV - P53-740-C-N-D-4.5OV - P54-770-D-N-D-4.5OV
This completes the English editing encyclopedia entry structure for the P51-750-A-N-D-4.5OV, covering all the required aspects within the specified word count.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق P51-750-A-N-D-4.5OV في الحلول التقنية
What is the P51-750-A-N-D-4.5OV used for?
- The P51-750-A-N-D-4.5OV is a pressure sensor commonly used in industrial and technical applications to measure fluid or gas pressure.
What is the operating voltage range of the P51-750-A-N-D-4.5OV?
- The operating voltage range of the P51-750-A-N-D-4.5OV is 4.5V, making it suitable for low-power applications.
What is the pressure range that the P51-750-A-N-D-4.5OV can measure?
- The P51-750-A-N-D-4.5OV can measure pressure within a specific range, typically from 0 to 750 psi.
Is the P51-750-A-N-D-4.5OV suitable for use with corrosive fluids or gases?
- Yes, the P51-750-A-N-D-4.5OV is designed to be compatible with a wide range of fluids and gases, including some corrosive substances.
What output signal does the P51-750-A-N-D-4.5OV provide?
- The P51-750-A-N-D-4.5OV typically provides a standard analog output signal, such as 4-20mA or 0-5V, proportional to the measured pressure.
Can the P51-750-A-N-D-4.5OV be used in high-temperature environments?
- Yes, the P51-750-A-N-D-4.5OV is often designed to operate reliably in high-temperature environments, up to a certain limit specified by the manufacturer.
What are the typical applications for the P51-750-A-N-D-4.5OV?
- The P51-750-A-N-D-4.5OV is commonly used in hydraulic systems, pneumatic systems, industrial machinery, and automotive applications for pressure monitoring and control.
Does the P51-750-A-N-D-4.5OV require calibration?
- Yes, like most pressure sensors, the P51-750-A-N-D-4.5OV may require periodic calibration to ensure accurate and reliable measurements.
What is the accuracy of the P51-750-A-N-D-4.5OV?
- The accuracy of the P51-750-A-N-D-4.5OV is typically specified by the manufacturer and may vary based on the specific model and application requirements.
Is the P51-750-A-N-D-4.5OV suitable for use in hazardous environments?
- Some models of the P51-750-A-N-D-4.5OV may be designed to meet specific hazardous area certifications, but it's important to verify this with the manufacturer for the intended application.