CY74FCT574ATSOCG4

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Flip-Flop
• Characteristics: High-speed, low-power consumption
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: D-type flip-flop with 8-bit storage capacity
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 4.5V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay Time: 3.5ns (typical)
• Output Drive Capability: ±24mA

Detailed Pin Configuration

The CY74FCT574ATSOCG4 has a total of 20 pins. The pin configuration is as follows:

1. GND (Ground)
2. D0 (Data Input 0)
3. D1 (Data Input 1)
4. D2 (Data Input 2)
5. D3 (Data Input 3)
6. D4 (Data Input 4)
7. D5 (Data Input 5)
8. D6 (Data Input 6)
9. D7 (Data Input 7)
10. OE (Output Enable)
11. CP (Clock Pulse)
12. MR (Master Reset)
13. Q0 (Output 0)
14. Q1 (Output 1)
15. Q2 (Output 2)
16. Q3 (Output 3)
17. Q4 (Output 4)
18. Q5 (Output 5)
19. Q6 (Output 6)
20. VCC (Supply Voltage)

Functional Features

• D-type flip-flop with 8-bit storage capacity
• High-speed operation, suitable for time-critical applications
• Low-power consumption, ideal for battery-powered devices
• Output enable (OE) pin allows for easy control of output state
• Master reset (MR) pin resets all flip-flop outputs to a known state

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data processing - Low-power consumption prolongs battery life in portable devices - Compact SOIC package saves board space - Output enable feature provides flexibility in controlling output state

Disadvantages: - Limited storage capacity of 8 bits may not be sufficient for certain applications requiring larger data storage - Operating temperature range may restrict usage in extreme environments

Working Principles

The CY74FCT574ATSOCG4 is a D-type flip-flop that stores 8 bits of data. It operates based on the rising edge of the clock pulse (CP) input. When the CP signal transitions from low to high, the data present at the D0-D7 inputs is latched and stored in the corresponding Q0-Q7 outputs. The stored data remains unchanged until the next clock pulse occurs.

The output enable (OE) pin controls the state of the outputs. When OE is low, the outputs are enabled and reflect the stored data. Conversely, when OE is high, the outputs are disabled and remain in a high-impedance state.

The master reset (MR) pin resets all flip-flop outputs to a known state when activated. This ensures a predictable initial state upon power-up or when a reset signal is required.

Detailed Application Field Plans

The CY74FCT574ATSOCG4 is widely used in various digital systems and applications, including but not limited to: - Data storage and retrieval systems - Microcontrollers and microprocessors - Communication equipment - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

• SN74FCT574ATPWRG4 (Texas Instruments)
• MC74FCT574ADWG (ON Semiconductor)
• CD74FCT574E (Texas Instruments)
• 74FCT574TQ (Integrated Device Technology)

These alternative models offer similar functionality and can be used as replacements for the CY74FCT574ATSOCG4 in various applications.

In conclusion, the CY74FCT574ATSOCG4 is a high-speed, low-power D-type flip-flop IC with 8-bit storage capacity. Its compact SOIC package, along with its functional features such as output enable and master reset, make it suitable for a wide range of digital applications. However, its limited storage capacity and operating temperature range should be considered when selecting this IC for specific projects.