Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74HC126DT
عرض التفاصيل جداول البيانات

SN74HC126DT

Product Overview

Category

SN74HC126DT belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal amplification and buffering.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

SN74HC126DT is available in a standard 14-pin dual in-line package (DIP).

Essence

The essence of SN74HC126DT lies in its ability to provide reliable signal amplification and buffering, ensuring smooth data transmission within electronic circuits.

Packaging/Quantity

SN74HC126DT is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Output Current: ±8mA

Detailed Pin Configuration

  1. GND (Ground)
  2. A Input
  3. B Input
  4. Enable Input
  5. Y Output
  6. GND (Ground)
  7. C Input
  8. D Input
  9. Enable Input
  10. Y Output
  11. VCC (Positive Power Supply)
  12. Y Output
  13. E Input
  14. F Input

Functional Features

  • Quad buffer/line driver
  • 3-state outputs for bus-oriented applications
  • High-speed operation enables efficient data transmission
  • Wide operating voltage range allows compatibility with different systems
  • Schmitt-trigger inputs for noise immunity

Advantages

  • Reliable signal amplification and buffering
  • Low power consumption
  • Versatile compatibility with various logic families
  • Suitable for bus-oriented applications

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

SN74HC126DT operates as a quad buffer/line driver, amplifying and buffering input signals to ensure proper data transmission. The enable inputs control the output states, allowing for 3-state outputs in bus-oriented applications. The Schmitt-trigger inputs provide noise immunity, enhancing the reliability of the device.

Detailed Application Field Plans

SN74HC126DT finds extensive application in various electronic devices, including but not limited to: - Microcontrollers - Digital signal processors - Communication systems - Industrial automation equipment - Consumer electronics

Detailed and Complete Alternative Models

  1. SN74HC125N: Similar functionality with slightly different pin configuration.
  2. SN74HCT126D: Compatible alternative with increased operating temperature range.
  3. CD74HC126E: Equivalent IC with similar characteristics and pin configuration.

These alternative models can be considered based on specific requirements and availability.

Word count: 436 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74HC126DT في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of SN74HC126DT:

  1. Q: What is SN74HC126DT? A: SN74HC126DT is a quad bus buffer gate with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the operating voltage range for SN74HC126DT? A: The operating voltage range for SN74HC126DT is typically between 2V and 6V.

  3. Q: What is the maximum output current that SN74HC126DT can handle? A: SN74HC126DT can handle a maximum output current of 8mA per channel.

  4. Q: Can SN74HC126DT be used as a level shifter? A: Yes, SN74HC126DT can be used as a level shifter to convert signals from one voltage level to another.

  5. Q: How many channels does SN74HC126DT have? A: SN74HC126DT has four independent channels, each with a separate input and output.

  6. Q: What is the purpose of the 3-state outputs in SN74HC126DT? A: The 3-state outputs allow the outputs to be disabled or put into a high-impedance state, which is useful for bus sharing applications.

  7. Q: Can SN74HC126DT be used in both CMOS and TTL logic systems? A: Yes, SN74HC126DT is compatible with both CMOS and TTL logic systems.

  8. Q: What is the maximum propagation delay of SN74HC126DT? A: The maximum propagation delay of SN74HC126DT is typically around 12ns.

  9. Q: Can SN74HC126DT be used in high-speed applications? A: Yes, SN74HC126DT is suitable for high-speed applications due to its fast switching speed.

  10. Q: What are some common applications of SN74HC126DT? A: SN74HC126DT is commonly used in bus drivers, memory address drivers, and other digital logic circuits where signal buffering and level shifting are required.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.