Texas Instruments
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SN74LVC162244AGQLR
عرض التفاصيل جداول البيانات

SN74LVC162244AGQLR

Product Overview

Category

SN74LVC162244AGQLR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal amplification and buffering in various electronic devices.

Characteristics

  • Low-voltage CMOS technology
  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Schmitt-trigger inputs for noise immunity
  • 16-bit buffer/driver with 3-state outputs

Package

SN74LVC162244AGQLR is available in a small-outline package (SOIC) with 48 pins.

Essence

The essence of SN74LVC162244AGQLR lies in its ability to amplify and buffer signals, ensuring reliable transmission within electronic circuits.

Packaging/Quantity

SN74LVC162244AGQLR is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 4.3ns
  • Maximum Operating Frequency: 100MHz

Detailed Pin Configuration

The pin configuration of SN74LVC162244AGQLR is as follows:

___________ OE |1 48| VCC A1 |2 47| B1 Y1 |3 46| A2 Y2 |4 45| B2 GND |5 44| Y3 Y4 |6 43| A3 B4 |7 42| B3 A4 |8 41| Y5 Y5 |9 40| GND B5 |10 39| Y6 A5 |11 38| B6 Y6 |12 37| A6 GND |13 36| B7 Y7 |14 35| A7 B8 |15 34| Y8 A8 |16 33| GND Y8 |17 32| OE# B9 |18 31| A9 A9 |19 30| B10 Y9 |20 29| A10 GND |21 28| Y10 Y11 |22 27| B11 B11 |23 26| A11 A11 |24 25| Y12 ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • 16-bit buffer/driver with 3-state outputs
  • Non-inverting outputs
  • High output drive capability
  • Supports bidirectional data flow
  • Enables/disables outputs via the Output Enable (OE) pin

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Wide operating voltage range
  • High-speed operation
  • Schmitt-trigger inputs for noise immunity
  • Compact package size

Disadvantages

  • Limited number of input/output pins
  • May require additional external components for specific applications

Working Principles

SN74LVC162244AGQLR operates by receiving input signals and amplifying/buffering them to ensure proper transmission. The IC utilizes low-voltage CMOS technology, allowing for efficient operation with low power consumption. The Schmitt-trigger inputs provide noise immunity, enhancing the reliability of signal processing.

Detailed Application Field Plans

SN74LVC162244AGQLR finds applications in various electronic devices and systems, including but not limited to: - Microcontrollers - Data communication systems - Industrial automation equipment - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN74LVC162244AGQLR are: - SN74LVC16244A - SN74LVC16245A - SN74LVC162244ADGGR - SN74LVC162244ADLR - SN74LVC162244ADGG

These alternative models offer similar functionality and characteristics, providing flexibility in choosing the most suitable IC for specific applications.

*Note: The content provided above is approximately 500 words. Additional information may be required to meet the

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SN74LVC162244AGQLR في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of SN74LVC162244AGQLR in technical solutions:

  1. Q: What is SN74LVC162244AGQLR? A: SN74LVC162244AGQLR is a 16-bit buffer/driver with 3-state outputs, designed for low-voltage (1.65V to 3.6V) applications.

  2. Q: What is the purpose of SN74LVC162244AGQLR? A: SN74LVC162244AGQLR is used to provide buffering and driving capabilities for digital signals in various electronic circuits.

  3. Q: What is the maximum operating frequency of SN74LVC162244AGQLR? A: The maximum operating frequency of SN74LVC162244AGQLR is typically around 100 MHz.

  4. Q: Can SN74LVC162244AGQLR be used with different voltage levels? A: Yes, SN74LVC162244AGQLR supports voltage translation between different voltage levels, making it suitable for interfacing between different logic families.

  5. Q: How many output pins does SN74LVC162244AGQLR have? A: SN74LVC162244AGQLR has 16 output pins, each capable of driving up to 32 mA of current.

  6. Q: Is SN74LVC162244AGQLR compatible with both CMOS and TTL logic levels? A: Yes, SN74LVC162244AGQLR is compatible with both CMOS and TTL logic levels, allowing seamless integration with different types of logic circuits.

  7. Q: Can SN74LVC162244AGQLR be used in bidirectional data transfer applications? A: Yes, SN74LVC162244AGQLR supports bidirectional data flow, making it suitable for applications where data needs to be transferred in both directions.

  8. Q: What is the power supply voltage range for SN74LVC162244AGQLR? A: SN74LVC162244AGQLR operates with a power supply voltage range of 1.65V to 3.6V.

  9. Q: Does SN74LVC162244AGQLR have built-in ESD protection? A: Yes, SN74LVC162244AGQLR has built-in ESD protection, ensuring robustness against electrostatic discharge events.

  10. Q: Can SN74LVC162244AGQLR be used in automotive applications? A: Yes, SN74LVC162244AGQLR is qualified for automotive applications and meets the necessary standards for automotive electronics.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of SN74LVC162244AGQLR.