Vishay Semiconductor Diodes Division
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BZD27C24P-E3-18
عرض التفاصيل جداول البيانات

BZD27C24P-E3-18

Introduction

The BZD27C24P-E3-18 is a specialized electronic component belonging to the category of voltage regulator diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diode
  • Use: Voltage regulation in electronic circuits
  • Characteristics: High precision, low leakage current, and fast response time
  • Package: SOD-123FL
  • Essence: Precision voltage regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage Rating: 24V
  • Power Dissipation: 1W
  • Forward Voltage Drop: 0.9V
  • Reverse Leakage Current: 5µA
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The BZD27C24P-E3-18 has a standard SOD-123FL package with three pins: 1. Pin 1: Anode 2. Pin 2: Not connected 3. Pin 3: Cathode

Functional Features

  • Precision Regulation: Ensures stable output voltage under varying load conditions.
  • Fast Response Time: Rapidly adjusts to changes in input voltage.
  • Low Leakage Current: Minimizes power loss and enhances efficiency.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Fast response time
  • Low leakage current

Disadvantages

  • Limited to a specific voltage rating
  • Sensitive to reverse voltage polarity

Working Principles

The BZD27C24P-E3-18 operates based on the Zener effect, where it maintains a constant voltage drop across its terminals by allowing current to flow in reverse bias at a specific voltage.

Detailed Application Field Plans

The BZD27C24P-E3-18 finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Voltage reference in sensor circuits

Detailed and Complete Alternative Models

Some alternative models to the BZD27C24P-E3-18 include: - BZX84C24LT1G - MMBZ27VALT1G - PZU24B2A,115

In conclusion, the BZD27C24P-E3-18 is a crucial component for precision voltage regulation in electronic circuits, offering high accuracy, fast response, and low leakage current. Its application spans across diverse fields, making it an essential part of modern electronic systems.

[Word Count: 345]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BZD27C24P-E3-18 في الحلول التقنية

  1. What is the BZD27C24P-E3-18 component used for in technical solutions?

    • The BZD27C24P-E3-18 is a dual Zener diode designed for voltage regulation and transient overvoltage protection in various electronic circuits.

  2. What are the electrical characteristics of the BZD27C24P-E3-18?

    • The BZD27C24P-E3-18 has a nominal Zener voltage of 24V, a maximum reverse current of 5μA, and a maximum power dissipation of 500mW.

  3. How can the BZD27C24P-E3-18 be utilized for voltage regulation?

    • The BZD27C24P-E3-18 can be connected in parallel with the load to maintain a constant output voltage, especially in low-power applications.

  4. In what type of circuits can the BZD27C24P-E3-18 provide transient overvoltage protection?

    • The BZD27C24P-E3-18 is suitable for use in various electronic circuits, including power supplies, communication systems, and automotive electronics, to protect against transient voltage spikes.

  5. What is the maximum operating temperature range for the BZD27C24P-E3-18?

    • The BZD27C24P-E3-18 has an operating temperature range of -65°C to +150°C, making it suitable for a wide range of environmental conditions.

  6. Can the BZD27C24P-E3-18 be used in automotive applications?

    • Yes, the BZD27C24P-E3-18 is suitable for use in automotive electronics due to its ability to provide transient overvoltage protection.

  7. Are there any specific layout considerations when using the BZD27C24P-E3-18 in a circuit?

    • It is important to minimize the length of the traces connecting the BZD27C24P-E3-18 to other components to reduce parasitic inductance and ensure optimal performance.

  8. What are the packaging options available for the BZD27C24P-E3-18?

    • The BZD27C24P-E3-18 is available in a SOD-323 package, which is a small surface-mount package suitable for compact designs.

  9. Does the BZD27C24P-E3-18 require any external components for proper operation?

    • The BZD27C24P-E3-18 typically does not require additional external components for basic voltage regulation and transient overvoltage protection.

  10. Is the BZD27C24P-E3-18 RoHS compliant?

    • Yes, the BZD27C24P-E3-18 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious applications.