Vishay Semiconductor Diodes Division
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MBR30H100PT-E3/45
عرض التفاصيل جداول البيانات

MBR30H100PT-E3/45

Introduction

The MBR30H100PT-E3/45 is a high-performance Schottky rectifier diode designed for various electronic applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Electronic Components
  • Use: Rectification in power supply circuits, voltage clamping, and freewheeling diode applications.
  • Characteristics: High current capability, low forward voltage drop, fast switching speed, and high reliability.
  • Package: TO-220AB
  • Essence: Schottky rectifier diode
  • Packaging/Quantity: Available in reels or tubes, quantity varies based on supplier.

Specifications

  • Voltage Rating: 100V
  • Current Rating: 30A
  • Forward Voltage Drop: Typically 0.75V at 15A
  • Reverse Leakage Current: Maximum 500µA at 100V
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBR30H100PT-E3/45 has a standard TO-220AB package with three pins: 1. Pin 1: Anode (Positive terminal) 2. Pin 2: Cathode (Negative terminal) 3. Pin 3: Not connected (Tab for heat dissipation)

Functional Features

  • Fast switching speed for high-frequency applications
  • Low forward voltage drop for reduced power loss
  • High current capability for power handling
  • Excellent thermal performance due to the TO-220AB package

Advantages and Disadvantages

Advantages

  • High efficiency due to low forward voltage drop
  • Suitable for high-frequency applications
  • Robust construction for reliable operation
  • Good thermal management with the TO-220AB package

Disadvantages

  • Higher cost compared to standard silicon diodes
  • Limited reverse voltage capability compared to some other rectifier types

Working Principles

The MBR30H100PT-E3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction provides fast switching and low forward voltage drop characteristics. When forward-biased, it allows current flow with minimal voltage drop, making it suitable for high-efficiency rectification.

Detailed Application Field Plans

The MBR30H100PT-E3/45 is commonly used in the following applications: - Switching power supplies - DC-DC converters - Voltage clamping circuits - Freewheeling diode in inductive load applications

Detailed and Complete Alternative Models

Some alternative models to the MBR30H100PT-E3/45 include: - MBR30H100CT-E3/45 - MBR30H60CT-E3/45 - MBR30H150CT-E3/45 - MBR30H200CT-E3/45

These alternatives offer varying voltage and current ratings to suit different application requirements.

In conclusion, the MBR30H100PT-E3/45 is a high-performance Schottky rectifier diode with excellent characteristics for power supply and voltage clamping applications. Its fast switching speed, low forward voltage drop, and high current capability make it a preferred choice in various electronic circuits.

[Word Count: 489]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MBR30H100PT-E3/45 في الحلول التقنية

  1. What is the MBR30H100PT-E3/45 used for?

    • The MBR30H100PT-E3/45 is a high-efficiency, dual Schottky rectifier diode designed for use in power supply and DC/DC converter applications.

  2. What is the maximum voltage and current rating of the MBR30H100PT-E3/45?

    • The MBR30H100PT-E3/45 has a maximum repetitive reverse voltage of 100V and a continuous forward current rating of 30A.

  3. What are the key features of the MBR30H100PT-E3/45?

    • Some key features include low forward voltage drop, high-frequency operation capability, and excellent thermal management.

  4. How does the MBR30H100PT-E3/45 compare to other similar diodes?

    • The MBR30H100PT-E3/45 offers lower forward voltage drop and higher current capability compared to many standard diodes, making it suitable for high-power applications.

  5. Can the MBR30H100PT-E3/45 be used in automotive applications?

    • Yes, the MBR30H100PT-E3/45 is suitable for automotive systems due to its high efficiency and robust design.

  6. What are the typical applications for the MBR30H100PT-E3/45?

    • Typical applications include switch-mode power supplies, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  7. Does the MBR30H100PT-E3/45 require any special heat sinking or thermal considerations?

    • Due to its excellent thermal management, the MBR30H100PT-E3/45 may not require additional heat sinking in many applications, but it's important to consider thermal requirements based on the specific application.

  8. Is the MBR30H100PT-E3/45 suitable for high-frequency switching applications?

    • Yes, the MBR30H100PT-E3/45 is designed for high-frequency operation, making it suitable for fast-switching power supply designs.

  9. What are the recommended operating conditions for the MBR30H100PT-E3/45?

    • It is recommended to operate the MBR30H100PT-E3/45 within the specified temperature range and under the rated voltage and current limits for optimal performance.

  10. Are there any known reliability issues or failure modes associated with the MBR30H100PT-E3/45?

    • The MBR30H100PT-E3/45 is designed for high reliability and robustness, but it's important to follow proper handling and application guidelines to avoid potential failure modes.