Vishay Semiconductor Diodes Division
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TPSMB15AHE3_A/I
عرض التفاصيل جداول البيانات

TPSMB15AHE3_A/I

Product Overview

The TPSMB15AHE3A/I belongs to the category of transient voltage suppressor (TVS) diodes. These diodes are commonly used to protect sensitive electronic components from voltage spikes and transients. The TPSMB15AHE3A/I is designed to provide robust protection for a variety of electronic devices and circuits. Its characteristics include high surge capability, low clamping voltage, and fast response time. The package type for this diode is SMB, and it is available in tape and reel packaging with a specific quantity per reel.

Specifications

  • Part Number: TPSMB15AHE3_A/I
  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package Type: SMB
  • Packaging/Quantity: Tape and Reel, specific quantity per reel

Detailed Pin Configuration

The TPSMB15AHE3_A/I TVS diode typically features two pins, with specific pin configurations based on the manufacturer's datasheet. Please refer to the manufacturer's documentation for detailed pin configuration information.

Functional Features

  • Robust protection against voltage spikes and transients
  • Fast response time to clamp excessive voltage levels
  • Low clamping voltage to prevent damage to sensitive components

Advantages and Disadvantages

Advantages

  • Effective protection for sensitive electronic components
  • Fast response time enhances system reliability
  • Low clamping voltage minimizes potential damage

Disadvantages

  • May require careful consideration of reverse leakage current
  • Selection of appropriate clamping voltage may be critical for specific applications

Working Principles

The TPSMB15AHE3_A/I operates based on the principle of avalanche breakdown. When a voltage spike occurs, the diode rapidly conducts to divert excess current away from the protected circuit, thereby limiting the voltage across the load.

Detailed Application Field Plans

The TPSMB15AHE3_A/I is widely used in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • TPSMB6.5AHE3_A/I
  • TPSMB10AHE3_A/I
  • TPSMB24AHE3_A/I
  • TPSMB36AHE3_A/I

In conclusion, the TPSMB15AHE3_A/I transient voltage suppressor diode offers reliable protection against voltage spikes and transients, making it an essential component in numerous electronic applications.

[Word count: 366]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TPSMB15AHE3_A/I في الحلول التقنية

  1. What is the TPSMB15AHE3_A/I?

    • The TPSMB15AHE3_A/I is a transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What is the maximum voltage rating of the TPSMB15AHE3_A/I?

    • The TPSMB15AHE3_A/I has a maximum voltage rating of 15V, making it suitable for protecting low-voltage electronic circuits.

  3. What is the peak pulse power handling capability of the TPSMB15AHE3_A/I?

    • The TPSMB15AHE3_A/I can handle peak pulse power of up to 600 watts, providing robust protection against transient events.

  4. What are the typical applications of the TPSMB15AHE3_A/I?

    • The TPSMB15AHE3_A/I is commonly used in applications such as power supplies, communication systems, automotive electronics, and industrial equipment to protect against voltage surges.

  5. What is the operating temperature range of the TPSMB15AHE3_A/I?

    • The TPSMB15AHE3_A/I has an operating temperature range of -55°C to 150°C, allowing it to be used in a wide variety of environments.

  6. Does the TPSMB15AHE3_A/I meet any specific industry standards?

    • Yes, the TPSMB15AHE3_A/I is compliant with industry standards such as AEC-Q101 for automotive applications and is also RoHS compliant.

  7. What is the packaging type of the TPSMB15AHE3_A/I?

    • The TPSMB15AHE3_A/I is available in a surface mount DO-214AA (SMB) package, which is suitable for automated assembly processes.

  8. Can the TPSMB15AHE3_A/I be used for ESD protection?

    • Yes, the TPSMB15AHE3_A/I can provide effective electrostatic discharge (ESD) protection for sensitive electronic components.

  9. What is the clamping voltage of the TPSMB15AHE3_A/I?

    • The clamping voltage of the TPSMB15AHE3_A/I is typically around 24.4V at 10A, ensuring that the protected circuitry is not exposed to damaging voltages.

  10. Are there any recommended layout or mounting considerations for using the TPSMB15AHE3_A/I?

    • It is recommended to minimize the length of the leads and traces connecting the TPSMB15AHE3_A/I to the circuit to reduce inductance and optimize its performance. Additionally, proper heat sinking and PCB layout practices should be followed for optimal results.