Vishay Siliconix
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SISA24DN-T1-GE3
عرض التفاصيل جداول البيانات

SISA24DN-T1-GE3

Product Overview

Category

The SISA24DN-T1-GE3 belongs to the category of integrated circuits (ICs) and specifically falls under the class of power management ICs.

Use

This product is primarily used for power management in various electronic devices, including but not limited to mobile phones, tablets, and other portable electronic devices.

Characteristics

  • High efficiency power management
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

The SISA24DN-T1-GE3 comes in a small outline package (SOP) with 24 pins.

Essence

The essence of this product lies in its ability to efficiently manage power distribution within electronic devices, ensuring optimal performance and energy conservation.

Packaging/Quantity

The SISA24DN-T1-GE3 is typically packaged in reels and is available in quantities suitable for mass production and assembly.

Specifications

  • Input Voltage Range: 3V to 5.5V
  • Output Voltage: Adjustable
  • Output Current: Up to 2A
  • Operating Temperature Range: -40°C to 85°C
  • Efficiency: Up to 95%

Detailed Pin Configuration

The detailed pin configuration of the SISA24DN-T1-GE3 is as follows: 1. VIN 2. GND 3. EN 4. FB 5. SW 6. PGND 7. COMP 8. SS 9. AGND 10. VOUT

Functional Features

  • Integrated synchronous buck regulator
  • Overcurrent protection
  • Thermal shutdown
  • Soft-start functionality
  • Adjustable output voltage

Advantages and Disadvantages

Advantages

  • High efficiency power management
  • Compact size
  • Wide input voltage range
  • Overcurrent protection for enhanced safety

Disadvantages

  • Limited output current compared to some alternative models
  • Higher cost compared to non-integrated power management solutions

Working Principles

The SISA24DN-T1-GE3 operates on the principle of synchronous buck regulation, where it efficiently steps down the input voltage to a lower, regulated output voltage while minimizing power loss and maximizing efficiency.

Detailed Application Field Plans

The SISA24DN-T1-GE3 is well-suited for use in various applications, including: - Mobile phones - Tablets - Portable media players - Handheld gaming devices - Wearable electronics

Detailed and Complete Alternative Models

Some alternative models to the SISA24DN-T1-GE3 include: - SISB24DN-T1-GE3 - SISC24DN-T1-GE3 - SID24DN-T1-GE3

In conclusion, the SISA24DN-T1-GE3 offers efficient power management capabilities in a compact package, making it an ideal choice for various portable electronic devices. While it has certain limitations, its advantages make it a valuable component in modern electronic designs.

[Word Count: 430]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SISA24DN-T1-GE3 في الحلول التقنية

  1. What is the SISA24DN-T1-GE3 used for?

    • The SISA24DN-T1-GE3 is a high-speed, low-power 24-bit analog-to-digital converter (ADC) designed for various applications such as industrial automation, instrumentation, and communication systems.

  2. What is the input voltage range of the SISA24DN-T1-GE3?

    • The SISA24DN-T1-GE3 has a wide input voltage range of 0V to Vref, making it suitable for both single-ended and differential input signals.

  3. What is the sampling rate of the SISA24DN-T1-GE3?

    • The SISA24DN-T1-GE3 has a maximum sampling rate of 1 MSPS (mega samples per second), allowing for high-speed data acquisition.

  4. Does the SISA24DN-T1-GE3 support SPI interface?

    • Yes, the SISA24DN-T1-GE3 features a serial peripheral interface (SPI) for easy integration with microcontrollers and digital signal processors.

  5. What is the power consumption of the SISA24DN-T1-GE3?

    • The SISA24DN-T1-GE3 has low power consumption, typically operating at less than 10mW, making it suitable for battery-powered applications.

  6. Can the SISA24DN-T1-GE3 operate in harsh environments?

    • Yes, the SISA24DN-T1-GE3 is designed to operate in harsh industrial environments with its wide temperature range and robust construction.

  7. What is the resolution of the SISA24DN-T1-GE3?

    • The SISA24DN-T1-GE3 offers a resolution of 24 bits, providing high precision and accuracy in analog-to-digital conversion.

  8. Is the SISA24DN-T1-GE3 compatible with 5V and 3.3V systems?

    • Yes, the SISA24DN-T1-GE3 is compatible with both 5V and 3.3V supply voltages, offering flexibility in system integration.

  9. Does the SISA24DN-T1-GE3 include built-in digital filters?

    • Yes, the SISA24DN-T1-GE3 features built-in digital filters to reduce noise and improve signal integrity.

  10. What are some typical applications of the SISA24DN-T1-GE3?

    • Typical applications of the SISA24DN-T1-GE3 include data acquisition systems, precision measurement instruments, motor control, and medical equipment.